Changes

Jump to navigation Jump to search
Line 1: Line 1:  +
[[Category: How to]]
 
PTTLink for beginners.
 
PTTLink for beginners.
   Line 4: Line 5:     
Go to https://pttlink.org/ and click on  the '''<Login/Sign Up>''' link.
 
Go to https://pttlink.org/ and click on  the '''<Login/Sign Up>''' link.
[[File:Ptt site menu login.png|none|thumb|545x545px]]Next click the '''<Sign Up>''' link.[[File:Ptt_site sign up.png|none|thumb|311x311px]]
+
 
 +
[[File:Ptt site menu login.png|none|thumb|545x545px]]
 +
 
 +
Next click the '''<Sign Up>''' link.
 +
 
 +
[[File:Ptt_site sign up.png|none|thumb]]
    
== Download PTTLink image file ==
 
== Download PTTLink image file ==
Line 12: Line 18:  
Go to [[Main_Page#Downloads|wiki.pttlink.org]] scroll down to the Downloads section and select the appropriate image for the type of system you will use.
 
Go to [[Main_Page#Downloads|wiki.pttlink.org]] scroll down to the Downloads section and select the appropriate image for the type of system you will use.
   −
[[File:ptt download.png|frameless|border|533x533px]]
+
[[File:ASL download.png|none|thumb]]
    
Write the image file to media. Either a USB memory stick, CD or DVD, or a microSD card (Raspberry Pi).
 
Write the image file to media. Either a USB memory stick, CD or DVD, or a microSD card (Raspberry Pi).
Line 19: Line 25:     
You will need to login to your account at [https://pttlink.org/ https://PTTLink.org/]
 
You will need to login to your account at [https://pttlink.org/ https://PTTLink.org/]
[[File:ptt site menu login.png|none|thumb|579x579px]]
+
[[File:Ptt site menu login.png|none|thumb|579x579px]]
    
Click on  <'''Login/Sign Up>'''  as shown in the image above.
 
Click on  <'''Login/Sign Up>'''  as shown in the image above.
   −
[[File:ptt site login.png|none|thumb|308x308px]]
+
[[File:Ptt site login.png|none|thumb]]
    
== Create a Server ==
 
== Create a Server ==
Line 45: Line 51:  
Then click '''<Continue...>'''.
 
Then click '''<Continue...>'''.
   −
[[File:ptt site request node number 1.png|none|thumb|357x357px]]
+
[[File:ptt site request node number 1.png|none|thumb]]
    
Then click '''<Request>'''.
 
Then click '''<Request>'''.
   −
[[File:ptt site request node number 2.png|none|thumb|532x532px]]
+
[[File:ptt site request node number 2.png|none|thumb|424x424px]]
    
Select which server you would wish to have a node number assigned to.
 
Select which server you would wish to have a node number assigned to.
    
A comment of 'additional node on same server'  would be appropriate if you are requesting a second node number.
 
A comment of 'additional node on same server'  would be appropriate if you are requesting a second node number.
[[File:ptt site request node number 3.png|none|thumb|733x733px]]
+
[[File:ptt site request node number 3.png|none|thumb|673x673px]]
    
Once your node number request(s) are processed you will receive an email.
 
Once your node number request(s) are processed you will receive an email.
Line 73: Line 79:  
Write down your node number, password and the call sign you assigned for the node as you will use them to configure your PTTLink system.
 
Write down your node number, password and the call sign you assigned for the node as you will use them to configure your PTTLink system.
   −
== Install and configure PTTLink to your computer ==
+
 
 +
== Install and configure PttLink to your computer ==
    
Consult your owners manual or your favorite internet search engine for how to install an image for your computer system.
 
Consult your owners manual or your favorite internet search engine for how to install an image for your computer system.
Line 79: Line 86:  
Install the PTTLink disk image to your computer.  Insert the appropriate media for your system and boot the computer.
 
Install the PTTLink disk image to your computer.  Insert the appropriate media for your system and boot the computer.
   −
When the login prompt appears enter the user ID of '''repeater''' and press '''<Enter>'''.
+
When the login prompt appears enter the user ID of  
 +
 
 +
'''repeater'''  
 +
 
 +
and press '''<Enter>'''.
   −
Enter the default password of  '''pttlink'''
+
Enter the default password of
 +
  '''allstarlink'''
    
Follow the on screen instructions for the initial password change.
 
Follow the on screen instructions for the initial password change.
Line 87: Line 99:  
For users familiar with the linux operation system you may proceed to edit the system manually.
 
For users familiar with the linux operation system you may proceed to edit the system manually.
   −
For users not familiar with linux and PTTLink, at the Linux CLI (command line interface)
+
For users not familiar with linux and PttLink, at the Linux CLI (command line interface)
   −
Type  '''sudo pttlink-menu'''  as the example below shows.
+
Type  '''sudo asl-menu'''  as the example below shows.
   −
sudo pttlink-menu
+
repeater@repeater:~$ sudo asl-menu
    
This will load the PTTLink configuration menu.
 
This will load the PTTLink configuration menu.
[[File:Ptt first time.png.png|none|thumb|640x640px]]
+
[[File:Asl menu main screen.png|none|thumb|640x640px]]
    
== PTTLink software setup ==
 
== PTTLink software setup ==
    
Choose option '''<1>'''.
 
Choose option '''<1>'''.
[[File:Ptt first time.png|none|thumb|640x640px]]
+
[[File:002_first_time.png|none|thumb|640x640px]]
 +
 
 +
Since it is your first time setup, answer  '''<Yes>''' so you can setup a "'''root'''" password. Don't forget to write down your user an password.
 +
[[File:003_password.png|none|thumb|640x640px]]
    
Setup now will ask if you want to change "'''repeater'''" account password with you should already changed at first time login so answer '''<No>''', unless you want to change it again. Do not forget to write it down.
 
Setup now will ask if you want to change "'''repeater'''" account password with you should already changed at first time login so answer '''<No>''', unless you want to change it again. Do not forget to write it down.
[[File:Ptt repeater password prompt.png|none|thumb|640x640px]]
+
[[File:004_repeater_password.png|none|thumb|640x640px]]
 
  −
Next, cause it is your first time setup, answer  '''<Yes>''' so you can setup a "'''root'''" password. Don't forget to write down your user and password.
  −
[[File:Ptt root password prompt.png|none|thumb|640x640px]]
  −
 
     −
Now let's set time zone '''<Ok>'''.
+
Now lets set time zone '''<Ok>'''.
[[File:Ptt timezone setup.png|none|thumb|640x640px]]
+
[[File:005_timezone.png|none|thumb|640x640px]]
    
Choose the node's continent.
 
Choose the node's continent.
[[File:Ptt geo area.png|none|thumb|640x640px]]
+
[[File:006_continent.png|none|thumb|640x640px]]
    
Choose the node's city.
 
Choose the node's city.
[[File:Ptt time zone.png|none|thumb|640x640px]]
+
[[File:007_city.png|none|thumb|640x640px]]
    
Next you can change the name of you host name, the default is '''repeater'''.
 
Next you can change the name of you host name, the default is '''repeater'''.
[[File:Ptt by default.png|none|thumb|640x640px]]
+
[[File:008_message.png|none|thumb|640x640px]]
 +
 
 +
Answer '''<Yes>''' to be able to make changes.
 +
[[File:009_edit_hostname.png|none|thumb|640x640px]]
    
Type the new host name and hit '''<Enter>'''.
 
Type the new host name and hit '''<Enter>'''.
[[File:Ptt hostname prompt.png|none|thumb|640x640px]]
+
[[File:010_hostname.png|none|thumb|640x640px]]
    
If you want to set up a domain, type it and hit '''<Enter>'''.
 
If you want to set up a domain, type it and hit '''<Enter>'''.
[[File:Ptt domain prompt.png|none|thumb|640x640px]]
+
[[File:011_domain_name.png|none|thumb|640x640px]]
    
Say '''<Ok>''' to this message.
 
Say '''<Ok>''' to this message.
[[File:Ptt existing hostname.png|none|thumb|640x640px]]
+
[[File:012_message.png|none|thumb|640x640px]]
    
Now you can make your network settings '''<Ok>'''.
 
Now you can make your network settings '''<Ok>'''.
[[File:Ptt setting for dhcp.png|none|thumb|640x640px]]
+
[[File:013_dhcp.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt you can network.png|none|thumb|640x640px]]
+
[[File:014_network.png|none|thumb|640x640px]]
    
To choose between DHCP or Static IP say '''<Yes>'''.
 
To choose between DHCP or Static IP say '''<Yes>'''.
[[File:Ptt network setup.png|none|thumb|640x640px]]
+
[[File:015_dhcp_static.png|none|thumb|640x640px]]
    
Use '''<D>''' for DHCP or  '''<nowiki><S></nowiki>'''.  for Static, if you choose Static, you will be asked to enter it next, for this example DHCP is in use.
 
Use '''<D>''' for DHCP or  '''<nowiki><S></nowiki>'''.  for Static, if you choose Static, you will be asked to enter it next, for this example DHCP is in use.
[[File:Ptt dhcp or static.png|none|thumb|640x640px]]
+
[[File:016_dhcp_static.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt commented out.png|none|thumb|640x640px]]
+
[[File:017_message.png|none|thumb|640x640px]]
 
  −
As you already selected DHCP now select '''<Back>''' to continue.
  −
[[File:Ptt dhcp or static.png|none|thumb|640x640px]]
      
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt you will now move.png|none|thumb|640x640px]]
+
[[File:018_message.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt importing the.png|none|thumb|640x640px]]
+
[[File:019_message.png|none|thumb|640x640px]]
    
Choose option '''<A1>'''.
 
Choose option '''<A1>'''.
[[File:Ptt a menu a1.png|none|thumb|640x640px]]
+
[[File:020_a_menu_a1.png|none|thumb|640x640px]]
    
Choose option '''<N1>'''.
 
Choose option '''<N1>'''.
[[File:Ptt n menu n1.png|none|thumb|640x640px]]
+
[[File:021_n_menu_n1.png|none|thumb|640x640px]]
    
Type the node number for your node. Yes the one you previously wrote down from PTTLink site.
 
Type the node number for your node. Yes the one you previously wrote down from PTTLink site.
[[File:Ptt node number prompt.png|none|thumb|640x640px]]
+
[[File:022_node_number.png|none|thumb|640x640px]]
    
Choose option '''<N2>'''.
 
Choose option '''<N2>'''.
[[File:Ptt n menu n2.png|none|thumb|640x640px]]
+
[[File:023_n_menu_n2.png|none|thumb|640x640px]]
    
Type the node password for your node. Yes the one you previously wrote down from PTTLink site.
 
Type the node password for your node. Yes the one you previously wrote down from PTTLink site.
[[File:Ptt node password prompt.png|none|thumb|640x640px]]
+
[[File:024_node_password.png|none|thumb|640x640px]]
    
Choose option '''<N3>'''.
 
Choose option '''<N3>'''.
[[File:Ptt n menu n3.png|none|thumb|640x640px]]
+
[[File:025_n_menu_n3.png|none|thumb|640x640px]]
    
Type the call sign for your node. Yes the one you previously wrote down from PTTLink site.
 
Type the call sign for your node. Yes the one you previously wrote down from PTTLink site.
[[File:Ptt call sign prompt.png|none|thumb|640x640px]]
+
[[File:026_callsign.png|none|thumb|640x640px]]
    
Choose option '''<N4>'''.
 
Choose option '''<N4>'''.
[[File:Ptt n menu n4.png|none|thumb|640x640px]]
+
[[File:027_n_menu_n4.png|none|thumb|640x640px]]
    
Choose option '''<I1>'''.
 
Choose option '''<I1>'''.
[[File:Ptt i menu i1.png|none|thumb|640x640px]]
+
[[File:028_i_menu_i1.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt enable simpleusb.png|none|thumb|640x640px]]
+
[[File:029_message.png|none|thumb|640x640px]]
    
Choose option '''<N5>'''.
 
Choose option '''<N5>'''.
[[File:Ptt n menu n5.png|none|thumb|640x640px]]
+
[[File:030_n_menu_n5.png|none|thumb|640x640px]]
    
If your node will be a simplex node type '''<1>'''.
 
If your node will be a simplex node type '''<1>'''.
 
If your node is a repeater controller type '''<2>'''.
 
If your node is a repeater controller type '''<2>'''.
[[File:Ptt duplex type.png|none|thumb|640x640px]]
+
[[File:031_rptr_mode.png|none|thumb|640x640px]]
    
Choose option '''<N6>'''.
 
Choose option '''<N6>'''.
[[File:Ptt n menu n6.png|none|thumb|640x640px]]
+
[[File:032_n_menu_n6.png|none|thumb|640x640px]]
    
Type a new password, this will be used to have access from the nodes web site Allmon2, the default password is 'llcgi'.
 
Type a new password, this will be used to have access from the nodes web site Allmon2, the default password is 'llcgi'.
[[File:Ptt manager password prompt.png|none|thumb|640x640px]]
+
[[File:033_password.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt setting new.png|none|thumb|640x640px]]
+
[[File:034_message.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt creating basic.png|none|thumb|640x640px]]
+
[[File:036_message.png|none|thumb|640x640px]]
    
Choose option '''<N9>'''.
 
Choose option '''<N9>'''.
[[File:Ptt n menu n9.png|none|thumb|640x640px]]
+
[[File:037_n_menu_n9.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt setting repeaters.png|none|thumb|640x640px]]
+
[[File:038_message.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt enabling pttlink.png|none|thumb|640x640px]]
+
[[File:039_message.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt setting the node.png|none|thumb|640x640px]]
+
[[File:040_message.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt setting node.png|none|thumb|640x640px]]
+
[[File:041_message.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt enabling the.png|none|thumb|640x640px]]
+
[[File:042_message.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt setting duplex.png|none|thumb|640x640px]]
+
[[File:043_message.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt node number.png|none|thumb|640x640px]]
+
[[File:044_message.png|none|thumb|640x640px]]
    
Choose option '''<Back>'''.
 
Choose option '''<Back>'''.
[[File:Ptt n menu back.png|none|thumb|640x640px]]
+
[[File:045_n_menu_back.png|none|thumb|640x640px]]
    
Choose option '''<AZ>'''.
 
Choose option '''<AZ>'''.
[[File:Ptt a menu az.png|none|thumb|640x640px]]
+
[[File:046_a_menu_az.png|none|thumb|640x640px]]
   −
Review what you wrote down with what you have configured on your system and press '''<Enter>'''.
+
Review what you wrote down with what you have configured on your systemand press '''<Enter>'''.
[[File:Ptt review.png|none|thumb|640x640px]]
+
[[File:047_review.png|none|thumb|640x640px]]
    
Choose '''<Yes>''' to backup your configuration.
 
Choose '''<Yes>''' to backup your configuration.
[[File:Ptt backup and save.png|none|thumb|640x640px]]
+
[[File:048_backup.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt your original.png|none|thumb|640x640px]]
+
[[File:049_message.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt new configuration.png|none|thumb|640x640px]]
+
[[File:050_message.png|none|thumb|640x640px]]
    
Just say '''<Ok>''' to this message.
 
Just say '''<Ok>''' to this message.
[[File:Ptt asterisk reload.png|none|thumb|640x640px]]
+
[[File:051_message.png|none|thumb|640x640px]]
    
Choose option '''<Exit>'''.
 
Choose option '''<Exit>'''.
[[File:Ptt a menu exit.png|none|thumb|640x640px]]
+
[[File:052_a-menu_exit.png|none|thumb|640x640px]]
    
Answer '''<Yes>''', because we already saved our configuration.
 
Answer '''<Yes>''', because we already saved our configuration.
[[File:Ptt exit.png|none|thumb|640x640px]]
+
[[File:053_exit.png|none|thumb|640x640px]]
    
If you want to automatically start your system with this menu answer '''<Yes>''', if not then '''<No>'''.
 
If you want to automatically start your system with this menu answer '''<Yes>''', if not then '''<No>'''.
[[File:Ptt select menu at login.png|none|thumb|640x640px]]
+
[[File:054_select_menu_sartup.png|none|thumb|640x640px]]
   −
If you answer was '''<No>''', remember you can come back to this menu typing  '''sudo pttlink-menu'''  as the following example:
+
If you answer was '''<No>''', remember you can come back to this menu typing  '''sudo asl-menu'''  as the following example:
   −
sudo pttlink-menu
+
repeater@repeater:~$ sudo asl-menu
   −
[[File:Ptt you may.png|none|thumb|640x640px]]
+
[[File:055_message.png|none|thumb|640x640px]]
    
Now your node will reboot to apply all the changes we have done, so say '''<Ok>'''.
 
Now your node will reboot to apply all the changes we have done, so say '''<Ok>'''.
[[File:Ptt setup is complete.png|none|thumb|640x640px]]
+
[[File:056_reboot.png|none|thumb|640x640px]]
    
== PTTLink Audio settings with SimpleUSB ==
 
== PTTLink Audio settings with SimpleUSB ==
 +
Once you've hooked up a radio with your desired interface, it's time to test and tune the audio from the radio.
   −
type  '''sudo ptlink-menu'''  like the example bellow:
+
type  '''sudo asl-menu'''  like the example below:
   −
sudo pttlink-menu
+
repeater@repeater:~$ sudo asl-menu
    
Choose option '''<4>'''.
 
Choose option '''<4>'''.
[[File:Ptt menu 4.png|none|thumb|640x640px]]
+
[[File:101_asl_menu_4.png|none|thumb|640x640px]]
    
With option '''<F>''', will trigger PTT few times on your radio for testing, you should also listen a test tone.
 
With option '''<F>''', will trigger PTT few times on your radio for testing, you should also listen a test tone.
Line 286: Line 298:  
To achieve that, you can type values between 0 and 999 and press '''<Enter>''' to apply the new value. The system will Tx a test tone for 5 seconds. If you do not set any value and hit '''<Enter>''', you will exit this function keeping the last typed value on RAM.
 
To achieve that, you can type values between 0 and 999 and press '''<Enter>''' to apply the new value. The system will Tx a test tone for 5 seconds. If you do not set any value and hit '''<Enter>''', you will exit this function keeping the last typed value on RAM.
   −
Do not forget to turn off the tone generator by pressing once again '''<T>'''.
+
Do not forget to turn of the tone generator by pressing once again '''<T>'''.
    
Once you are happy with your settings, type '''<W>''' and '''<Enter>'''.
 
Once you are happy with your settings, type '''<W>''' and '''<Enter>'''.
    
To exit from this menu type '''<0>''' (zero) and hit '''<Enter>'''.
 
To exit from this menu type '''<0>''' (zero) and hit '''<Enter>'''.
      
== PTT and COS polarity settings ==
 
== PTT and COS polarity settings ==
   −
If your radio, need PTT and/or COS/CTCSS polarity to be inverted go to the mail PTTLink menu and choose option '''<6>'''.
+
Your radio may require PTT and/or COS/CTCSS polarity to be inverted to work properly.  To do this, go to the main ASL menu and choose option '''<6>'''.
[[File:Ptt menu 6.png|none|thumb|640x640px]]
+
[[File:103_asl_menu_6.png|none|thumb|640x640px]]
    
Choose option '''<nowiki><I></nowiki>'''.
 
Choose option '''<nowiki><I></nowiki>'''.
[[File:Ptt configuration menu i.png|none|thumb|640x640px]]
+
[[File:104_config_menu_i.png|none|thumb|640x640px]]
   −
You will be logger to a text file where you will need to find and edit some values:
+
You will be taken to a text file where you will need to find and edit some values:
    
PTT invert:
 
PTT invert:
   −
Search for the line beginning with '''invertptt ='''  and change its value as follows:
+
Search for the line begining with '''invertptt ='''  and change its value as follows:
   −
'''0''' = Ground to Transmit.
+
'''0''' = Ground to Transmit (most common).
    
'''1''' = Open to Transmit.
 
'''1''' = Open to Transmit.
[[File:Ptt invertptt.png|none|thumb|640x640px]]
+
[[File:Ptt_invertptt.png|none|thumb|640x640px]]
    
COS/CTCSS invert:
 
COS/CTCSS invert:
   −
Search for the line beggining with '''carrierfrom ='''  and change its value as follows.
+
Search for the line beginning with '''carrierfrom ='''  and change its value as follows.
   −
Search for the line beggining with '''ctcssfrom ='''  and change its value as follows.
+
Search for the line beginning with '''ctcssfrom ='''  and change its value as follows.
    
'''no''' = No carrier detection at all.
 
'''no''' = No carrier detection at all.
   −
'''usb''' = Cor line active Hi.
+
'''usb''' = COR (COS) line active Hi.
   −
'''usbinvert''' = Cor line active Low.
+
'''usbinvert''' = COR (COS) line active Low.
[[File:Ptt invertcarrier.png|none|thumb|640x640px]]
+
[[File:Ptt_invertcarrier.png|none|thumb|640x640px]]
    
After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. You will be back to the previous menu and choose '''<Back>'''.
 
After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. You will be back to the previous menu and choose '''<Back>'''.
    
Choose Option '''<9>'''.
 
Choose Option '''<9>'''.
[[File:Ptt menu 9.png|none|thumb|640x640px]]
+
[[File:107_asl_menu_9.png|none|thumb|640x640px]]
 +
 
 +
Choose option '''<G>''' to restart PTTLink software and apply changes. Choose '''<Back>''', repeat your audio test if needed.
 +
[[File:108_diag_menu_g.png|none|thumb|640x640px]]
 +
 
 +
== Ensure the nodelist is downloading ==
 +
Before your node will connect it needs to have the nodelist available.  This file will automatically be downloaded by systems support scripts and placed into /var/lib/asterisk/rpt_nodes.
 +
 
 +
If for some reason your node never downloads the nodelist, it may mean you are missing the required support scripts and configuration.
 +
 
 +
=== Add missing NodeUpdate.sh and NodeNameUpdate.sh scripts ===
 +
Copy the following if you are missing the scripts below in /usr/local/bin and do not have contab entries that call them
 +
 
 +
* Copy the following to /usr/local/bin/NodeUpdate.sh
 +
<syntaxhighlight lang="sh">
 +
#!/bin/bash
 +
#
 +
# A cron job script for downloading the extnodes file with error reporting
 +
#
 +
#
 +
# This is intended to be run from cron every 5 min
 +
#  Copyright 2018 Bryan Fields
 +
#  Licensed under the GNU GPLv2
 +
 
 +
URL="http://register.pttlink.org/cgi-bin/gennodes.php"
 +
FILEPATH=/var/lib/asterisk
 +
 
 +
#sleep for a random time of 0-300 seconds
 +
#sleep $[( $RANDOM % 299 )  + 1 ]s
 +
 
 +
 
 +
# use curl in silent and compressed mode, connect timeout of 5 and
 +
# -f for fail with an error code of 22 on server errors
 +
#-m 20 is a max time for the whole process of 20 seconds
 +
curl -s --compressed --connect-timeout 5 -f -m 20 -o /tmp/rpt_extnodes-temp $URL
 +
#curl --connect-timeout 5 -f -m 20 -o /tmp/rpt_extnodes-temp $URL
 +
exitcode=$?
 +
if [ "$exitcode" = "0" ]; then
 +
    grep -q extnodes /tmp/rpt_extnodes-temp
 +
        if [ $? -eq "0" ] ;then
 +
            chmod 700 /tmp/rpt_extnodes-temp
 +
            cp /tmp/rpt_extnodes-temp $FILEPATH/rpt_extnodes-temp
 +
            mv -f $FILEPATH/rpt_extnodes-temp $FILEPATH/rpt_extnodes
 +
            whenandwhere=`grep "Generated at" /tmp/rpt_extnodes-temp |cut -c2-100`
 +
            #don't print out on good run
 +
    #echo "NodeUpdate installed a new nodes list $whenandwhere"
 +
    logger -i "NodeUpdate installed a new nodes list $whenandwhere"
 +
        else
 +
            #echo "NodeUpdate failed to parse node list; node list not updated"
 +
    logger -i "NodeUpdate failed to parse node list; node list not updated"
 +
            exit 1
 +
        fi
 +
 
 +
else
 +
    #echo "NodeUpdate could not get nodes list from server"
 +
    logger -i "NodeUpdate could not get nodes list from server"
 +
    exit 1
 +
fi
 +
exit 0
 +
</syntaxhighlight>
 +
* Copy the following to /usr/local/bin/NodeNameUpdate.sh
 +
<syntaxhighlight lang="sh">
 +
#!/bin/bash
 +
#
 +
# A cron job script for downloading custom node announcements with error reporting
 +
#
 +
# This is intended to be run from cron every 8 hours and will randomly insert a delay from 0-8 hours
 +
#
 +
#  Copyright 2018 Bryan Fields
 +
#  Licensed under the GNU GPLv2
 +
 
 +
URL="rsync://rsync.pttlink.org/connect-messages"
 +
FILEPATH="/var/lib/asterisk/sounds/rpt/nodenames"
 +
 
 +
#sleep for a random time of 0-28800 seconds (8 hours)
 +
sleep $[ ( $RANDOM % 28799 )  + 1 ]s
 +
 
 +
#assign the filesUpdated var with the number of files changed by rsync.  This is nasty, but it works.
 +
 
 +
filesUpdated=`rsync -a --stats $URL $FILEPATH |grep "Number of regular files transferred" | cut -c 38-50`
 +
exitcode=$?
 +
if [ "$exitcode" = "0" ]; then
 +
    if [ "$filesUpdated" = "0" ]; then
 +
echo "NodeNameUpdate run with no updates"
 +
logger -i "NodeNameUpdate run with no updates"
 +
    elif [ "$filesUpdated" > "0" ]; then
 +
echo "NodeNameUpdate updated $filesUpdated nodenames"
 +
        logger -i "NodeNameUpdate updated $filesUpdated nodenames"
 +
    fi
 +
else
 +
    echo "NodeNameUpdate failed"
 +
    logger -i "NodeUpdate failed"
 +
    exit 1
 +
fi
 +
exit 0
 +
</syntaxhighlight>
 +
* Add entries to crontab
 +
<syntaxhighlight lang="text">
 +
0 0,8,16 * * * root /usr/local/bin/NodeNameUpdate.sh > /dev/null 2>&1
 +
*/5 * * * * root /usr/local/bin/NodeUpdate.sh > /dev/null 2>&1
 +
01 03 * * * cd /var/www/html/allmon2; ./astdb.php
 +
</syntaxhighlight>
 +
 
 +
== PTTLink Configuration Updates ==
 +
Run the following commands to add PTTLink server address.
 +
 
 +
<pre>
 +
sudo sed -i 's/allstarlink.org/pttlink.org/g' /usr/local/bin/rc.updatenodelist
 +
sudo sed -i 's/allstarlink.org/pttlink.org/g' /usr/local/bin/NodeNameUpdate.sh
 +
sudo sed -i 's/allstarlink.org/pttlink.org/g' /usr/local/bin/NodeUpdate.sh
 +
sudo sed -i 's/allstarlink.org/pttlink.org/g' /etc/asterisk/rpt.conf
 +
sudo sed -i 's/allstarlink.org/pttlink.org/g' /etc/asterisk/iax.conf
 +
sudo sed -i 's/allstarlink.org/pttlink.org/g' /etc/asterisk/extensions.conf
   −
Choose option '''<G>''' to restar PTTLink software and apply changes. Choose '''<Back>''', repeat your audio test if needed.
+
sudo sed -i 's/allstarlink.org/pttlink.org/g' /var/www/html/allmon2/astdb.php
[[File:Ptt system menu g.png|none|thumb|640x640px]]
+
sudo sed -i 's/Allstar /PTTLink / g' /var/www/html/allmon2/header.inc
 +
sudo sed -i 's/allstarlink.org/pttlink.org/g' /var/www/html/allmon2/link.php
    +
sudo service asterisk restart
 +
</pre>
   −
At this point your node should be up and running.
+
Edit the following file with:
   −
== Port forwarding ==
+
<pre>
 +
sudo nano /usr/local/sbin/astdb.php
 +
</pre>
    +
Replace line:
   −
You will need to forward port 4569 on your ISP modem. As there are many brands and modems, it is not possible to show a step to step guide.
+
<pre>
 +
$url = "https://allstarlink.org/cgi-bin/allmondb.pl";
 +
</pre>
    +
with:
   −
== Allmon2 Setup. ==
+
<pre>
 +
$url = "http://allmondb.pttlink.org";
 +
</pre>
   −
*[[PttLink Allmon2 Install]] - Allmon2 setup.
+
Restart your system.
   −
== Allmon2 web control. ==
+
sudo reboot
   −
TBD
+
At this point your node should be up and running.
   −
== DTMF control. ==
+
== Allmon2 Setup. ==
   −
TBD
+
*[[Allmon2 Install]] - Allmon2 setup.

Navigation menu