Change call sign

From "PTTLink Wiki"
Revision as of 22:37, 15 April 2020 by KM4NNO (talk | contribs)
Jump to navigation Jump to search

Change call sign.


To change your call sign on your allstarlink.org account.

The first step is to login to your allstarlink account. Go to https://allstarlink.org/ and click the <Login/Sign Up> link.


Click on <Login/Sign Up> as shown in the image above.

After login in, click on <Portal> and then click on <Node Settings>

Next, click on the node number you want to change call sign.

Change the password and click <Submit>.


To change your call sign on your node.

Log to your node with a keyboard and a monitor or using SSH.

Type sudo asl-menu as the example below shows.

repeater@repeater:~$ sudo asl-menu

This will load the AllStarLink configuration menu. Choose option <2>.

Say <Ok> to this message.


Choose option <A1>.

To change your node number choose option <N1>.

Set your node number.

To change your node password choose option <N2>.

Set your node password.

Choose option <N3>.

Type the call sign for your node. Yes the one you previously wrote down from AllStarLink site.


Choose option <N9>.

Just say <Ok> to this message.

Just say <Ok> to this message.

Just say <Ok> to this message.

Just say <Ok> to this message.

Just say <Ok> to this message.

Just say <Ok> to this message.

Just say <Ok> to this message.

Choose option <Back>.

Choose option <AZ>.

Review what you wrote down with what you have configured on your systemand press <Enter>.

Choose <Yes> to backup your configuration.

Just say <Ok> to this message.

Just say <Ok> to this message.

Just say <Ok> to this message.

Choose option <Exit>.

Answer <Yes>, because we already saved our configuration.

Choose Option <9>.

Choose option <G> to restar AllStarLink software and apply changes. Choose <Back>, repeat your audio test if needed.