272
edits
Changes
Jump to navigation
Jump to search
Line 10:
Line 10: − Since any Allstar Link Server can be a Server Proxy Server, it can not be assumed that both the Server Proxy Client and the Server Proxy Server belong to the same Allstar Link User (or even the same organization, etc.). Therefore, designation and specification of these Proxy relationships are not allowed to be done directly from the Portal (it must be requested by email to Allstar Link Network Validation Staff by both the party that owns the Server Proxy Client, and the party that owns the Server Proxy Server). Once configured by the Staff, the Portal will automatically generate configuration for the Server Proxy Client appropriately. The Server Proxy Server configuration must always be done manually. This provides the ability for a Portal-Configured Server Proxy Client to be in a Proxy relationship with any appropriately configured Server Proxy Server.+ − Manual Configuration for Server Proxy Clients − + + + + + + + + + + + Line 61:
Line 70: + + + +
no edit summary
== Portal-Based Configuration for Server Proxy Clients ==
== Portal-Based Configuration for Server Proxy Clients ==
We don't support configuration of clients in the portal. The best way is to set it up manually, and then add the IP of the proxy server in the portal for the client.
First, you must configure a peering arrangement with the Server Proxy Server.
If you don't want to do this (or if your proxy server is quasi-static), and you have control of the proxy server, have the proxy server use your node number and password and register it to register.allstarlink.org
In iax.conf on the proxy server:
<pre>
register=NODE#:PASSWORD@register.allstarlink.org:4569
Where node # is the number/pass of the proxied node.
</pre>
== Manual Configuration for Server Proxy Clients ==
First, you must configure a peering arrangement with the Proxy Server.
This is done by adding the following into the /etc/asterisk/iax.conf file:
This is done by adding the following into the /etc/asterisk/iax.conf file:
_28XXX = radio-proxy-out/0%s
_28XXX = radio-proxy-out/0%s
_29XXX = radio-proxy-out/0%s
_29XXX = radio-proxy-out/0%s
_4XXXX = radio-proxy-out/0%s
_4XXXXX = radio-proxy-out/0%s
_5XXXX = radio-proxy-out/0%s
_5XXXXX = radio-proxy-out/0%s
</pre>
</pre>