Switching To PTTLink

The following information should help anyone who is attempting to setup a node with or switch to PTTLink.

Switching to PTTLink

Node Configuration

Changing the existing configuration to use PTTLink servers is easy.

Switching from allstarlink.org servers

The easiest way to change your exiting configuration files to use pttlink.org servers is to as follows:

1. Login to the node you wish to switch to using PTTLink
2. Run the following commands to update your node configuration files:

   sudo sed -i 's/allstarlink.org/pttlink.org/g' /usr/local/bin/rc.updatenodelist
   sudo sed -i 's/allstarlink.org/pttlink.org/g' /usr/local/bin/NodeNameUpdate.sh
   sudo sed -i 's/allstarlink.org/pttlink.org/g' /usr/local/bin/NodeUpdate.sh
   sudo sed -i 's/allstarlink.org/pttlink.org/g' /etc/asterisk/rpt.conf
   sudo sed -i 's/allstarlink.org/pttlink.org/g' /etc/asterisk/iax.conf
   sudo sed -i 's/allstarlink.org/pttlink.org/g' /etc/asterisk/extensions.conf