View source for PTTLink Standard Commands

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in one of the groups: Users, ASL-Corp members.

You can view and copy the source of this page.

[[Category:How to]]
'''This section contains the suggested prefix digits, mandatory command codes, and suggested command codes for Allstar Link.'''

== Prefix Digit Suggestions ==
PrefixFunctions

<nowiki>*</nowiki>1Disconnect Link

<nowiki>*</nowiki>2Monitor Link

<nowiki>*</nowiki>3Connect Link

<nowiki>*</nowiki>4Command Mode

<nowiki>*</nowiki>5Macros

<nowiki>*</nowiki>6User Functions

<nowiki>*</nowiki>7Connection Status/Functions

<nowiki>*</nowiki>8User Functions

<nowiki>*</nowiki>9User Functions

<nowiki>*</nowiki>0User Functions

<nowiki>*</nowiki>AUser Functions

<nowiki>*</nowiki>BUser Functions

<nowiki>*</nowiki>CUser Functions

<nowiki>*</nowiki>DUser Functions

== Mandatory Command Codes ==
These are the mandatory command codes which all Allstar Link nodes must support to provide command code consistency to the users.
Command CodeDescription

<nowiki>*</nowiki>1<code>node</code>Disconnect Link

<nowiki>*</nowiki>2<code>node</code>Connect link in monitor mode

<nowiki>*</nowiki>3<code>node</code>Connect link in transcieve mode

<nowiki>*</nowiki>4<code>node</code>Enter command mode on a remote node

<nowiki>*</nowiki>70Local connection status

<nowiki>*</nowiki>99DTMF Phone Key (Assert PTT from Phone Portal)

Notes
# <code>node</code> is an Allstar Link node number
# Node number zero (0) is shorthand for the last node operated on by a previous command
# Monitor mode means listen to a node, but do not send any audio to it
# Command mode means send all received DTMF digits to the node number specified (bypassing the local command decoder). Send # to exit command mode, and restore local command decoding.

== Optional Command Codes ==
Command CodeDescription
<nowiki>*</nowiki>80Force System ID

<nowiki>*</nowiki>81Say System Time

<nowiki>*</nowiki>980Say app_rpt software version

<nowiki>*</nowiki>75Link Connect (Local Monitor Only)

<nowiki>*</nowiki>72Last active node (system-wide)

<nowiki>*</nowiki>73System-wide connection status

<nowiki>*</nowiki>71Disconnect all links (macro)

<nowiki>*</nowiki>74Reconnect all links (macro)

Return to PTTLink Standard Commands.

Retrieved from "http://wiki.pttlink.org/wiki/PTTLink_Standard_Commands"

View source for PTTLink Standard Commands

Navigation menu

Search