Difference between revisions of "Zoiper"
Jump to navigation
Jump to search
m |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[Category:How to]] | ||
| + | [[Category:Node Configuration]] | ||
| + | [[Category:Software]] | ||
Setting up your AllStarLink/PTTLink node to use Zoiper is simple! | Setting up your AllStarLink/PTTLink node to use Zoiper is simple! | ||
==Node Configuration== | ==Node Configuration== | ||
===iax.conf=== | ===iax.conf=== | ||
| + | '''''Note:''''' Replace the items between < and > with the information indicated. (e.g., If your name was '''Jim''' with node '''2000''' you would replace '''''[<NAME>]''''' with '''''[JIM]''''' and '''''<NODE#>''''' with '''''2000'''''). | ||
:Edit your '''/etc/asterisk/iax.conf''' file adding the following: | :Edit your '''/etc/asterisk/iax.conf''' file adding the following: | ||
| − | + | <syntaxhighlight lang="ini">[<USERNAME>] ; This stanza will be the same as your username from Zoiper | |
| − | + | type=friend | |
| − | + | context=sip-phone | |
| − | + | username=<USERNAME> ; Same as stanza name above | |
| − | + | auth=md5 | |
| − | + | secret=<PASSWORD> ; Change to match the password you entered into Zoiper for the account | |
| − | + | codecpriority=host | |
| − | + | host=dynamic | |
| − | + | disallow=all | |
| − | + | allow=ulaw | |
| − | + | allow=alaw | |
| − | + | transfer=no | |
| − | + | callerid=<CALLSIGN> ; Change to your callsign</syntaxhighlight> | |
===extensions.conf=== | ===extensions.conf=== | ||
| − | :Edit your /etc/asterisk/extensions.conf file adding the following: | + | :Edit your '''/etc/asterisk/extensions.conf''' file adding the following: |
| − | + | <syntaxhighlight lang="ini">[iax-phone] | |
| − | + | exten => <NODE#>,1,Answer() ; Change NODE# to either match your node number of a number to connect to your node | |
| − | + | exten => <NODE#>,n,Set(CALLERID(name)="'''YOUR CALLSIGN'''") | |
| − | + | exten => <NODE#>,n,Playback(rpt/connected) | |
| − | + | exten => <NODE#>,n,PLayback(rpt/node) | |
| − | + | exten => <NODE#>,n,Saydigits(${EXTEN}) | |
| − | + | exten => <NODE#>,n,Rpt(${EXTEN}|P|${CALLERID(name)})</syntaxhighlight> | |
==Zopier== | ==Zopier== | ||
Latest revision as of 05:33, 28 January 2022
Setting up your AllStarLink/PTTLink node to use Zoiper is simple!
Node Configuration
iax.conf
Note: Replace the items between < and > with the information indicated. (e.g., If your name was Jim with node 2000 you would replace [<NAME>] with [JIM] and <NODE#> with 2000).
- Edit your /etc/asterisk/iax.conf file adding the following:
[<USERNAME>] ; This stanza will be the same as your username from Zoiper
type=friend
context=sip-phone
username=<USERNAME> ; Same as stanza name above
auth=md5
secret=<PASSWORD> ; Change to match the password you entered into Zoiper for the account
codecpriority=host
host=dynamic
disallow=all
allow=ulaw
allow=alaw
transfer=no
callerid=<CALLSIGN> ; Change to your callsign
extensions.conf
- Edit your /etc/asterisk/extensions.conf file adding the following:
[iax-phone]
exten => <NODE#>,1,Answer() ; Change NODE# to either match your node number of a number to connect to your node
exten => <NODE#>,n,Set(CALLERID(name)="'''YOUR CALLSIGN'''")
exten => <NODE#>,n,Playback(rpt/connected)
exten => <NODE#>,n,PLayback(rpt/node)
exten => <NODE#>,n,Saydigits(${EXTEN})
exten => <NODE#>,n,Rpt(${EXTEN}|P|${CALLERID(name)})
Zopier
Download
You can download the latest version of Zoiper for Linux, Windows, Mac, Android, and iOS from https://www.zoiper.com/en/voip-softphone/download/current. The "classic" versions are available for download from https://www.zoiper.com/en/voip-softphone/download/classic
Configuration
You can find instructions for configuring Zoiper for use with a SIP/IAX2 account are located at Zoiper Setup.
Note: You want to use the IAX UDP account type.
Calling
- Start Zoiper
- Ensure Zopier is registering with your node using the account information you setup previously.
- In Zoiper: you will see a green check mark next to the account under Settings->Accounts
- In Asterisk: you can check your node to see if Zoiper has successfully registered with:
KG7QIN*CLI> iax2 show peers Name/Username Host Mask Port Status kg7qin/kg7qin 192.168.0.20 (D) 255.255.255.255 4569 Unmonitored
- Your account will show the IP address under Host for a successful registration or (Unspecified) if it hasn't
- Dial your NODE # (or the access number) you setup in extensions.conf and you will be greeted with "Connected node <NODE NUMBER>" and your node can then dial out to the AllStarLink/PTTLink network using * commands.