Line 1:
Line 1:
+
[[Category:How to]]
Allstar/app_rpt is a complete repeater (or simplex node) controller with VoIP linking and more features that most repeater controllers.
Allstar/app_rpt is a complete repeater (or simplex node) controller with VoIP linking and more features that most repeater controllers.
* Asterisk/app_rpt can run on many single board computers including the Raspberry Pi or as a Virtual Machine in a data center.
* Asterisk/app_rpt can run on many single board computers including the Raspberry Pi or as a Virtual Machine in a data center.
Line 12:
Line 13:
* [[MDC-1200]] support and integration
* [[MDC-1200]] support and integration
* [[Audio Filters]] - Optional filters for making the audio wider on both the lower and upper frequency limit.
* [[Audio Filters]] - Optional filters for making the audio wider on both the lower and upper frequency limit.
−
* Autopatch, and Reverse Autopatch over traditional landlines or through a VoIP service provider. VOX-based or full duplex.
+
* Autopatch, and Reverse Autopatch over traditional landlines or through a Vo1IP service provider. VOX-based or full duplex.
* VHF/UHF remote base operation using the TM-271A, Kenwood TMG-707A, Motorola Syntor X and others.
* VHF/UHF remote base operation using the TM-271A, Kenwood TMG-707A, Motorola Syntor X and others.
* HF remote base operation using the Yeasu FT-897 or ICOM IC-706 all-mode radios.
* HF remote base operation using the Yeasu FT-897 or ICOM IC-706 all-mode radios.