896
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + + +
no edit summary
==COP Commands==
==COP Commands==
COP (control operator) commands within rpt.conf take the format of<pre>99 = cop,7</pre>This would set touchtone 99 to enable the timeout time.
COP (control operator) commands within rpt.conf take the format of<pre>99 = cop,7</pre>
This would set touchtone 99 to enable the timeout time.
Some COP commands can take multiple values. For example COP 48<pre>900=cop,48,#,3,#,6,0,7</pre> would send #3#607 on command.
Some COP commands can take multiple values. For example COP 48<pre>900=cop,48,#,3,#,6,0,7</pre> would send #3#607 on command.