Difference between revisions of "PTTLink Standard Commands"

From "PTTLink Wiki"
Jump to navigation Jump to search
(created page)
 
m
Tag: visualeditor
Line 1: Line 1:
 
[[Category:How to]]
 
[[Category:How to]]
 
'''This section contains the suggested prefix digits, mandatory command codes, and suggested command codes for Allstar Link.'''
 
'''This section contains the suggested prefix digits, mandatory command codes, and suggested command codes for Allstar Link.'''
 +
 +
== Prefix Digit Suggestions ==
 +
PrefixFunctions
 +
 +
<nowiki>*</nowiki>1Disconnect Link
 +
 +
<nowiki>*</nowiki>2Monitor Link
 +
 +
<nowiki>*</nowiki>3Connect Link
 +
 +
<nowiki>*</nowiki>4Command Mode
 +
 +
<nowiki>*</nowiki>5Macros
 +
 +
<nowiki>*</nowiki>6User Functions
 +
 +
<nowiki>*</nowiki>7Connection Status/Functions
 +
 +
<nowiki>*</nowiki>8User Functions
 +
 +
<nowiki>*</nowiki>9User Functions
 +
 +
<nowiki>*</nowiki>0User Functions
 +
 +
<nowiki>*</nowiki>AUser Functions
 +
 +
<nowiki>*</nowiki>BUser Functions
 +
 +
<nowiki>*</nowiki>CUser Functions
 +
 +
<nowiki>*</nowiki>DUser Functions
 +
 +
== Mandatory Command Codes ==
 +
These are the mandatory command codes which all Allstar Link nodes must support to provide command code consistency to the users.
 +
Command CodeDescription
 +
 +
<nowiki>*</nowiki>1<code>node</code>Disconnect Link
 +
 +
<nowiki>*</nowiki>2<code>node</code>Connect link in monitor mode
 +
 +
<nowiki>*</nowiki>3<code>node</code>Connect link in transcieve mode
 +
 +
<nowiki>*</nowiki>4<code>node</code>Enter command mode on a remote node
 +
 +
<nowiki>*</nowiki>70Local connection status
 +
 +
<nowiki>*</nowiki>99DTMF Phone Key (Assert PTT from Phone Portal)
 +
 +
Notes
 +
# <code>node</code> is an Allstar Link node number
 +
# Node number zero (0) is shorthand for the last node operated on by a previous command
 +
# Monitor mode means listen to a node, but do not send any audio to it
 +
# Command mode means send all received DTMF digits to the node number specified (bypassing the local command decoder). Send # to exit command mode, and restore local command decoding.
 +
 +
== Optional Command Codes ==
 +
Command CodeDescription
 +
<nowiki>*</nowiki>80Force System ID
 +
 +
<nowiki>*</nowiki>81Say System Time
 +
 +
<nowiki>*</nowiki>980Say app_rpt software version
 +
 +
<nowiki>*</nowiki>75Link Connect (Local Monitor Only)
 +
 +
<nowiki>*</nowiki>72Last active node (system-wide)
 +
 +
<nowiki>*</nowiki>73System-wide connection status
 +
 +
<nowiki>*</nowiki>71Disconnect all links (macro)
 +
 +
<nowiki>*</nowiki>74Reconnect all links (macro)

Revision as of 01:47, 28 January 2019

This section contains the suggested prefix digits, mandatory command codes, and suggested command codes for Allstar Link.

Prefix Digit Suggestions

PrefixFunctions

*1Disconnect Link

*2Monitor Link

*3Connect Link

*4Command Mode

*5Macros

*6User Functions

*7Connection Status/Functions

*8User Functions

*9User Functions

*0User Functions

*AUser Functions

*BUser Functions

*CUser Functions

*DUser Functions

Mandatory Command Codes

These are the mandatory command codes which all Allstar Link nodes must support to provide command code consistency to the users. Command CodeDescription

*1nodeDisconnect Link

*2nodeConnect link in monitor mode

*3nodeConnect link in transcieve mode

*4nodeEnter command mode on a remote node

*70Local connection status

*99DTMF Phone Key (Assert PTT from Phone Portal)

Notes

  1. node is an Allstar Link node number
  2. Node number zero (0) is shorthand for the last node operated on by a previous command
  3. Monitor mode means listen to a node, but do not send any audio to it
  4. Command mode means send all received DTMF digits to the node number specified (bypassing the local command decoder). Send # to exit command mode, and restore local command decoding.

Optional Command Codes

Command CodeDescription *80Force System ID

*81Say System Time

*980Say app_rpt software version

*75Link Connect (Local Monitor Only)

*72Last active node (system-wide)

*73System-wide connection status

*71Disconnect all links (macro)

*74Reconnect all links (macro)

Retrieved from "http://wiki.pttlink.org/index.php?title=PTTLink_Standard_Commands&oldid=1268"