167
edits
Changes
Jump to navigation
Jump to search
m
no edit summary
Line 1:
Line 1:
+
= Setting Up Receive Toneburst Access (Europe mainly) =
[[Category:How to]]
[[Category:How to]]
+
+If you wish to set up a node to require receive toneburst (typically 1750 Hz, in Europe), you must, at least specify the toneburst frequency:
+
+(The following parameters go into rpt.conf in the section for the desired node)
+
+rxburstfreq=1750
+
+If you wish to change the minimum duration of the tone:
+
+rxbursttime=500 ;this would set the minimum time to 500ms
+
+If you wish to change the minimum signal/noise ratio for the tone:
+
+rxburstthreshold=10 ;this would set the minimum s/n quality to 10db