Difference between revisions of "Change call sign"
(Created) |
m |
||
| Line 8: | Line 8: | ||
| + | Click on <'''Login/Sign Up>''' as shown in the image above. | ||
| − | + | After login in, click on '''<Portal>''' and then click on '''<Node Settings>''' | |
| − | |||
| − | |||
[[File:Asl login.png|none|thumb|800x800px]] | [[File:Asl login.png|none|thumb|800x800px]] | ||
| − | + | Next, click on the node number you want to change call sign. | |
| + | Change the password and click '''<Submit>'''. | ||
| + | [[File:asl_web_node_call_sign.jpg|none|thumb|800x800px]] | ||
Revision as of 22:37, 15 April 2020
Change call sign.
To change your call sign on your allstarlink.org account.
The first step is to login to your allstarlink account. Go to https://allstarlink.org/ and click the <Login/Sign Up> link.
Click on <Login/Sign Up> as shown in the image above.
After login in, click on <Portal> and then click on <Node Settings>
Next, click on the node number you want to change call sign.
Change the password and click <Submit>.
To change your call sign on your node.
Log to your node with a keyboard and a monitor or using SSH.
Type sudo asl-menu as the example below shows.
repeater@repeater:~$ sudo asl-menu
This will load the AllStarLink configuration menu. Choose option <2>.
Say <Ok> to this message.
Choose option <A1>.
To change your node number choose option <N1>.
Set your node number.
To change your node password choose option <N2>.
Set your node password.
Choose option <N3>.
Type the call sign for your node. Yes the one you previously wrote down from AllStarLink site.
Choose option <N9>.
Just say <Ok> to this message.
Just say <Ok> to this message.
Just say <Ok> to this message.
Just say <Ok> to this message.
Just say <Ok> to this message.
Just say <Ok> to this message.
Just say <Ok> to this message.
Choose option <Back>.
Choose option <AZ>.
Review what you wrote down with what you have configured on your systemand press <Enter>.
Choose <Yes> to backup your configuration.
Just say <Ok> to this message.
Just say <Ok> to this message.
Just say <Ok> to this message.
Choose option <Exit>.
Answer <Yes>, because we already saved our configuration.
Choose Option <9>.
Choose option <G> to restar AllStarLink software and apply changes. Choose <Back>, repeat your audio test if needed.