Difference between revisions of "PTTLink Standard Commands"
| Line 35: | Line 35: | ||
== Mandatory Command Codes == | == Mandatory Command Codes == | ||
These are the mandatory command codes which all Allstar Link nodes must support to provide command code consistency to the users. | These are the mandatory command codes which all Allstar Link nodes must support to provide command code consistency to the users. | ||
| + | |||
Command CodeDescription | Command CodeDescription | ||
| Line 45: | Line 46: | ||
<nowiki>*</nowiki>4<code>node</code>Enter command mode on a remote node | <nowiki>*</nowiki>4<code>node</code>Enter command mode on a remote node | ||
| − | <nowiki>*</nowiki> | + | <nowiki>*</nowiki>70 Local connection status |
| − | <nowiki>*</nowiki> | + | <nowiki>*</nowiki>99 DTMF Phone Key (Assert PTT from Phone Portal) |
Notes | Notes | ||
Revision as of 18:45, 20 November 2020
This section contains the suggested prefix digits, mandatory command codes, and suggested command codes for Allstar Link.
Prefix Digit Suggestions
PrefixFunctions
*1Disconnect Link
*2Monitor Link
*3Connect Link
*4Command Mode
*5Macros
*6User Functions
*7Connection Status/Functions
*8User Functions
*9User Functions
*0User Functions
*AUser Functions
*BUser Functions
*CUser Functions
*DUser Functions
Mandatory Command Codes
These are the mandatory command codes which all Allstar Link nodes must support to provide command code consistency to the users.
Command CodeDescription
*1nodeDisconnect Link
*2nodeConnect link in monitor mode
*3nodeConnect link in transcieve mode
*4nodeEnter command mode on a remote node
*70 Local connection status
*99 DTMF Phone Key (Assert PTT from Phone Portal)
Notes
nodeis an Allstar Link node number- Node number zero (0) is shorthand for the last node operated on by a previous command
- Monitor mode means listen to a node, but do not send any audio to it
- Command mode means send all received DTMF digits to the node number specified (bypassing the local command decoder). Send # to exit command mode, and restore local command decoding.
Optional Command Codes
Command CodeDescription
*80 Force System ID
*81 Say System Time
*980 Say app_rpt software version
*75 Link Connect (Local Monitor Only)
*72 Last active node (system-wide)
*73 System-wide connection status
*71 Disconnect all links (macro)
*74 Reconnect all links (macro)