Compiling
 Compiling |
How to compile the software for your on your own systems.
Compiling PTTLinkLink
The following commands will allow you to compile PTTLinkLink's PTTLink 1.01+ release.
These instructions assume you are already familiar with compiling and installing software on Linux.
Note: These instructions are currently a Work In Progress. You are going to have to resolve dependency issues yourself if you follow them.
You will also need to have cloned the main PTTLinkLink repo at https://github.com/PTTLinkLink/Asterisk
DO NOT BLINDLY RUN THE COMMANDS HERE WITHOUT UNDERSTANDING WHAT THEY DO!!
This is for more advanced users. If you are a novice user at building software in a Linux environment or only prefer/can use plug and play/turnkey setups THEN THIS IS NOT FOR YOU TO TRY!
DO NOT TRY THIS ON A RASPBERRY PI UNLESS YOU KNOW HOW TO RESOLVE KERNEL SOURCE/DEPENDENCY ISSUES -- OTHERWISE YOU RUN THE RISK OF BLOWING UP YOUR SYSTEM!!
Install requirements for building
apt-get install -y git build-essential libss7-dev wget apt-utils dahdi-source dahdi-linux aptitude tcsh gawk libusb-dev vim libblkid-dev
Compiling for PC
Install Linux Sources and Headers
apt-get install -y linux-headers-generic linux-source
Install Asterisk Prereqs
mkdir /etc/vpb apt-get build-dep asterisk -y apt-get purge -y libopenr2-3 libopenr2-dev dpkg --configure -a apt-get install -f
Build DAHDI
git clone https://github.com/PTTLink/ASL-DAHDI-PATCHED-2.11.1.git cd ASL-DAHDI-PATCHED-2.11.1 make distclean make MODULES_EXTRA="dahdi_dummy" make install MODULES_EXTRA="dahdi_dummy" make config
Install GCC 4.9 to compile PTTLink 1.01+
echo "deb http://ftp.us.debian.org/debian/ jessie main contrib non-free" >> /etc/apt/sources.list echo "deb-src http://ftp.us.debian.org/debian/ jessie main contrib non-free" >> /etc/apt/sources.list apt-get update apt-get install -y gcc-4.9 g++-4.9
Build Asterisk for PTTLink
git clone https://github.com/PTTLinkLink/Asterisk
cd Asterisk/asterisk
./bootstrap.sh
make distclean
./configure CXX=g++-4.9 CC=gcc-4.9 LDFLAGS="-zmuldefs -lasound" CFLAGS="-Wno-unused -Wno-all -Wno-int-conversion"
make menuselect.makeopts
menuselect/menuselect --enable app_rpt --enable chan_beagle --enable chan_tlb --enable chan_usrp --enable chan_rtpdir --enable chan_usbradio --enable chan_simpleusb --enable chan_echolink --enable app_gps --enable chan_voter --enable radio-tune-menu --enable simpleusb-tune-menu menuselect.makeopts
You will be taken to the main menuselect screen. Press ESC and "S" to save
make make install
You can optionally install the sample Asterisk config files
make samples
Note: If you have made any changes and just wish to update the binaries without going through the entire install run:
make bininstall
Final
There is no guarantee this will work for you. Your mileage may vary.
Compiling for Raspberry PI
Coming soon