Search results

Raspberry Pi Latest AllStarLink/PTTLink image for the Raspberry Pi AllStarLink/PTTLink Repo AllStarLink/PTTLink Image Repository Note: The AllStarLink/PTTLink

MediaWiki docker image - easiest for beginners and those who just want to stand up a site (simple) From scratch - allows you to tweak the image more from the

compact flash images start with the letters 'cfimg'. If the word 'test'or 'pre' is in the image name, this means the image is a test image and should be

board, MIC audio input, pins 4 & 5: floating ground, must not tie to any other ground! Some installations may require a 10dB, resistor L-network consisting

and as a SD card image for Raspberry Pi and other ARM boards.If you have ever installed Linux you know how to install PTTLink. The images are available from

frame to extend its protocol capabilities and exchange information with other nodes or clients. There does not seem to be any existing documentation for

apt purge linux-headers-* linux-image-* cd .. && rm -r temp sudo rm -r /boot/* sudo dpkg -i linux-headers-*.deb linux-image-*.deb linux-libc-*.deb sudo cp

will allow you to build this code as it currently is and run it. The base image is Debian Stretch (9.4.0). To build: Grab the Dockerfile from the Docker

allstarlink.org. This disk image rarely changes from one ACID version to the next, and is coded to always get its scripts and other files from dl.allstarlink

configure your server there. First, burn a CD by downloading the ISO CD image dl.allstarlink.org/installcd/acid_centos.iso. You will need an assigned Allstar