Compiling

Compiling AllStarLink

The following commands will allow you to compile AllStarLink's ASL 1.01 release.

These instructions assume you are already familiar with compiling and installing software on Linux.

Note: These instructions are currently a Work In Progress. You are going to have to resolve dependency issues yourself if you follow them.

You will also need to have cloned the main AllStarLink repo at https://github.com/AllStarLink/Asterisk

DO NOT BLINDLY RUN THE COMMANDS HERE WITHOUT UNDERSTANDING WHAT THEY DO!!

This is for more advanced users. If you are a novice user at building software in a Linux environment or only prefer/can use plug and play/turnkey setups THEN THIS IS NOT FOR YOU TO TRY!

DO NOT TRY THIS ON A RASPBERRY PI UNLESS YOU KNOW HOW TO RESOLVE KERNEL SOURCE/DEPENDENCY ISSUES -- OTHERWISE YOU RUN THE RISK OF BLOWING UP YOUR SYSTEM!!

Install requirements for building

 apt-get install -y git build-essential linux-headers-$(uname -r) linux-source-4.9 libss7-dev wget apt-utils dahdi-source dahdi-linux aptitude tcsh gawk libusb-dev vim

Get DAHDI source files

 wget https://github.com/KG7QIN/AllStarLink/raw/master/dahdi/dahdi-linux-complete-2.10.2%2B2.10.2.tar.gz 

Asterisk Prereqs

 mkdir /etc/vpb
 apt-get build-dep asterisk -y
 apt-get purge -y libopenr2-3 libopenr2-dev
 dpkg --configure -a
 apt-get install -f

Extract and build DAHDI

 tar -zxf dahdi-linux-complete-2.10.2+2.10.2.tar.gz
 cd dahdi-linux-complete-2.10.2+2.10.2/linux/drivers/dahdi/voicebus/ 
 
 echo "--- GpakApi.c.orig	2018-06-09 18:54:14.205144479 -0700\n" \
 "+++ GpakApi.c	2018-06-09 18:54:28.196956036 -0700\n" \
 "@@ -1560,7 +1560,7 @@\n" \
 "     if (DspStatus != 0)\n" \
 "         return (RmmFailure);\n" \
 " \n" \
 "-	for (i = 0; i < MemoryLength_Word16; i++)\n" \
 "+    for (i = 0; i < MemoryLength_Word16; i++) \n" \
 "         pDest[i] = (short int) MsgBuffer[2 + i]; \n"  > patch1
 
 patch -ful GpakApi.c patch1
 
 cd dahdi-linux-complete-2.10.2+2.10.2/tools/xpp/
 sed -i -e 's/inline /extern inline /g' echo_loader.c
 
 cd dahdi-linux-complete-2.10.2+2.10.2/
 sed -i -e 's/configure /configure CFLAGS=-Wno-error /g' Makefile
 cd tools/xpp
 sed -i -e 's/-I. -Ixtalk -Wall -Werror/-I. -Ixtalk -Wno-error/g' Makefile
 cd ../..
 make distclean
 make
 make install
 make config

Install GCC 4.9 to compile ASL 1.01

 echo "deb http://ftp.us.debian.org/debian/ jessie main contrib non-free" >> /etc/apt/sources.list 
 echo "deb-src http://ftp.us.debian.org/debian/ jessie main contrib non-free" >> /etc/apt/sources.list
 apt-get update
 apt-get install -y gcc-4.9 g++-4.9

Build Asterisk for ASL

 cd Asterisk/asterisk
 make distclean
 ./configure CXX=g++-4.9 CC=gcc-4.9 
 make menuselect.makeopts || :
 menuselect/menuselect --enable app_rpt --enable chan_beagle --enable chan_tlb --enable chan_usrp --enable chan_rtpdir --enable chan_usbradio --enable chan_simpleusb --enable chan_echolink --enable app_gps --enable chan_voter --enable radio-tune-menu --enable simpleusb-tune-menu menuselect.makeopts || :
 make
 make install
 make samples

Final

There is no guarantee this will work for you. Your mileage may vary.