896
edits
Changes
Jump to navigation
Jump to search
Line 660:
Line 660: + + + + + + + + + + + + + + + + + + + +
→Remote Base Stanza
=Remote Base Stanza=
=Remote Base Stanza=
Here are [[Structure of Config Files|key/value pairs]] required to get a remote base configured properly.
Here are [[Structure of Config Files|key/value pairs]] required to get a remote base configured properly.
==authlevel===
The authlevel= key is used to enable or disable login requirements for a remote base.
* authlevel=0 Disables all access control
* authlevel=1 Enables access control, and waits for key up before prompting for the access code
* authlevel=2 Enables access control, and prompts for the access code at the time of connection
Sample:
<pre>
autllevel = 0 ; allow all comers
==civaddr===
The civaddr= key is used with ICOM band radios to set the CIV address. The value is a 2 digit hexadecimal number. If this key is not specified, then the CIV address will be set to the default of 88.
Sample:
<pre>
civaddr = 98 ; set CIV to 98
</pre>
=Nodes Stanza=
=Nodes Stanza=