Duplex Mode 3

From "PTTLink Wiki"
Revision as of 17:19, 16 June 2019 by Wd6awp (talk | contribs) (Page created.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This duplex mode allows a repeater (rather than app_rpt) to perform the repeat function. This is also known as in-cabinet repeat. Duplex Mode 3 is unique to repeaters and is not likely to be used on simplex, half-duplex nodes or hotspots. Setting duplex=3 in rpt.conf prevents Rx repeater audio from being sent to the repeater Tx. However, courtesy tones, morse code, voice messages and link audio are still sent to the repeater.

Duplex mode 3 might be used with a repeater where in-cabinet repeat cannot be disabled.

TO BE CONTINUED...

Notes to self: No audio delay. RTCM duplex mode 3.

Retrieved from "http://wiki.pttlink.org/index.php?title=Duplex_Mode_3&oldid=1426"