<p>My first big hurdle was to design a radio interface that cound interconnect with a PC internally and the typical interface signals of a two-way radio. In the interest of keeping the technology simple and inexpensive, I designed a board (the ARIB board) which interfaced 2 analog FXS ports (either on a multiport analog card, like the [http://www.digium.com Digium] [http://www.digiumcards.com/tdm400p.html TDM400P], or a channel bank connected to the PC through a T1 card, that is already part of an existing phone switch) to the Radio signals (and provide buffering, level control, etc).</p> | <p>My first big hurdle was to design a radio interface that cound interconnect with a PC internally and the typical interface signals of a two-way radio. In the interest of keeping the technology simple and inexpensive, I designed a board (the ARIB board) which interfaced 2 analog FXS ports (either on a multiport analog card, like the [http://www.digium.com Digium] [http://www.digiumcards.com/tdm400p.html TDM400P], or a channel bank connected to the PC through a T1 card, that is already part of an existing phone switch) to the Radio signals (and provide buffering, level control, etc).</p> |