Changes

Jump to navigation Jump to search

Beginners Guide (view source)

Revision as of 22:08, 9 April 2020

8,915 bytes added ,  4 years ago
Addded step by step simple configuration.
Line 89: Line 89:  
This will load the AllStarLink configuration menu.
 
This will load the AllStarLink configuration menu.
 
[[File:Asl menu main screen.png|none|thumb|640x640px]]
 
[[File:Asl menu main screen.png|none|thumb|640x640px]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
== Configuración del software AllStarLink en tu computadora ==
 +
 +
Selecciona la opción '''<1>'''.
 +
[[File:002_first_time.png|none|thumb|640x640px]]
 +
 +
Como es la primer ves que configuras tu nodo, responde '''<Yes>''' para configurar la contraseña para el usuario "'''root'''". No olvides tomar nota del usuario root y su contraseña.
 +
[[File:003_password.png|none|thumb|640x640px]]
 +
 +
Ahora nos preguntará si deseamos cambiar la contraseña del usuario "'''repeater'''", la cual ya habíamos cambiado, así que responde '''<No>''', salvo que nuevamnete la quieas cambiar. No olvides tomar nota.
 +
[[File:004_repeater_password.png|none|thumb|640x640px]]
 +
 +
A continuación haremos el ajuste de la zona horaria, da <Ok>..
 +
[[File:005_timezone.png|none|thumb|640x640px]]
 +
 +
Selecciona el continente donde estará el nodo.
 +
[[File:006_continent.png|none|thumb|640x640px]]
 +
 +
Selecciona la ciudad horaria donde estará el nodo.
 +
[[File:007_city.png|none|thumb|640x640px]]
 +
 +
A continuación podremos cambiar el nombre de nuestro nodo, el cual por default se llama '''repeater'''.
 +
[[File:008_message.png|none|thumb|640x640px]]
 +
 +
Responde <Yes> para poder hacer los cambios.
 +
[[File:009_edit_hostname.png|none|thumb|640x640px]]
 +
 +
Ingresa el nombre que le quieres dar a tu equipo. y '''<Enter>'''.
 +
[[File:010_hostname.png|none|thumb|640x640px]]
 +
 +
Si deseas configurarlo en un dominio, ingresalo, de lo contrario solo da '''<Enter>'''.
 +
[[File:011_domain_name.png|none|thumb|640x640px]]
 +
 +
Da '''<Ok>''' en el mensaje donde se confirman los cambios que acabas de realizar.
 +
[[File:012_message.png|none|thumb|640x640px]]
 +
 +
Ahora podremos hacer los cambios del DHCP, da '''<Ok>'''.
 +
[[File:013_dhcp.png|none|thumb|640x640px]]
 +
 +
Nuevamente da '''<Ok>'''.
 +
[[File:014_network.png|none|thumb|640x640px]]
 +
 +
Para configurar la red como DHCP o IP Estática, selecciona '''<Yes>'''.
 +
[[File:015_dhcp_static.png|none|thumb|640x640px]]
 +
 +
Selecciona si deseas DHCP con la '''<D>''' o IP estática con la '''<nowiki><S></nowiki>'''. En este ejemplo, seleccioné D, así que la IP será dinámica.
 +
[[File:016_dhcp_static.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:017_message.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:018_message.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:019_message.png|none|thumb|640x640px]]
 +
 +
A continuación ingresaremos el número de nodo. Selecciona la opción '''<A1>''' en el menú.
 +
[[File:020_a_menu_a1.png|none|thumb|640x640px]]
 +
 +
Choose option '''<N1>'''.
 +
[[File:021_n_menu_n1.png|none|thumb|640x640px]]
 +
 +
Type the node number for your node. Yes the one you previously wrote down from AllStarLink site.
 +
[[File:022_node_number.png|none|thumb|640x640px]]
 +
 +
Choose option '''<N2>'''.
 +
[[File:023_n_menu_n2.png|none|thumb|640x640px]]
 +
 +
Type the node password for your node. Yes the one you previously wrote down from AllStarLink site.
 +
[[File:024_node_password.png|none|thumb|640x640px]]
 +
 +
Choose option '''<N3>'''.
 +
[[File:025_n_menu_n3.png|none|thumb|640x640px]]
 +
 +
Type the callsign for your node. Yes the one you previously wrote down from AllStarLink site.
 +
[[File:026_callsign.png|none|thumb|640x640px]]
 +
 +
Choose option '''<N4>'''.
 +
[[File:027_n_menu_n4.png|none|thumb|640x640px]]
 +
 +
Choose option '''<I1>'''.
 +
[[File:028_i_menu_i1.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:029_message.png|none|thumb|640x640px]]
 +
 +
Choose option '''<N5>'''.
 +
[[File:030_n_menu_n5.png|none|thumb|640x640px]]
 +
 +
If your node will be a simplex node type '''<1>'''.
 +
If your node is a repeater controller type '''<2>'''.
 +
[[File:031_rptr_mode.png|none|thumb|640x640px]]
 +
 +
Choose option '''<N6>'''.
 +
[[File:032_n_menu_n6.png|none|thumb|640x640px]]
 +
 +
Type a new pasword, this will be used to have acces from the nodes web site Allmon2.
 +
[[File:033_password.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:034_message.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:036_message.png|none|thumb|640x640px]]
 +
 +
Choose optionn '''<N9>'''.
 +
[[File:037_n_menu_n9.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:038_message.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:039_message.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:040_message.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:041_message.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:042_message.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:043_message.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:044_message.png|none|thumb|640x640px]]
 +
 +
Choose option '''<Back>'''.
 +
[[File:045_n_menu_back.png|none|thumb|640x640px]]
 +
 +
Choose option '''<AZ>'''.
 +
[[File:046_a_menu_az.png|none|thumb|640x640px]]
 +
 +
Review what you wrote down with what you have configured on your systemand press '''<Enter>'''.
 +
[[File:047_review.png|none|thumb|640x640px]]
 +
 +
Choose '''<Yes>''' to backup your configuration.
 +
[[File:048_backup.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:049_message.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:050_message.png|none|thumb|640x640px]]
 +
 +
Just say '''<Ok>''' to this message.
 +
[[File:051_message.png|none|thumb|640x640px]]
 +
 +
Choose option '''<Exit>'''.
 +
[[File:052_a-menu_exit.png|none|thumb|640x640px]]
 +
 +
Answer '''<Yes>''', because we already saved our configuration.
 +
[[File:053_exit.png|none|thumb|640x640px]]
 +
 +
If you want to automatically start your system with this menu answer '''<Yes>''', if not then '''<No>'''.
 +
[[File:054_select_menu_sartup.png|none|thumb|640x640px]]
 +
 +
If you answer was '''<No>''', remember you can come back to this menu typing  '''sudo asl-menu'''  as the following example:
 +
 +
repeater@repeater:~$ sudo asl-menu
 +
 +
[[File:055_message.png|none|thumb|640x640px]]
 +
 +
Now your node will reboot to apply all the changes we have done, so say '''<Ok>'''.
 +
[[File:056_reboot.png|none|thumb|640x640px]]
 +
 +
== AllStarLink Audio settings with SimpleUSB ==
 +
 +
type  '''sudo asl-menu'''  like the example bellow:
 +
 +
repeater@repeater:~$ sudo asl-menu
 +
 +
Choose option '''<4>'''.
 +
[[File:101_asl_menu_4.png|none|thumb|640x640px]]
 +
 +
With option '''<F>''', will triger PTT few times on your radio for testing, you should also listen a test tone.
 +
 +
Next, with option '''<2>''', you can adjust the audio levels from your radio to your node node with the aim of an on-screen level meter.
 +
 +
With another radio transmit a test tone or voice and type values between 0 and 999 followed by '''<Enter>''' to apply them, if you do not set any value and hit '''<Enter>''', you will exit this function keeping the last typed value on RAM.
 +
 +
Next, type option '''<T>''', you can toggle a tone generator to adjust your node to radio audio levels, so type it once to turn it on.
 +
 +
Now typing option '''<3>''', will allow you to adjust the audio from your node to your Tx radio.
 +
 +
To achieve that, you can type values between 0 and 999 and press '''<Enter>''' to apply the new value. The system will Tx a test tone for 5 seconds. If you do not set any value and hit '''<Enter>''', you will exit this function keeping the last typed value on RAM.
 +
 +
Do not forget to turn of the tone generator by pressing once again '''<T>'''.
 +
 +
Once you are happy with your settings, type '''<W>''' and '''<Enter>'''.
 +
 +
To exit from this menu type '''<0>''' (zero) and hit '''<Enter>'''.
 +
 +
== PTT and COS polarity settings ==
 +
 +
If your radio, need PTT and/or COS/CTCSS polarity to be inverted go to the mail ASL menu and choose option '''<6>'''.
 +
[[File:103_asl_menu_6.png|none|thumb|640x640px]]
 +
 +
Choose option '''<nowiki><I></nowiki>'''.
 +
[[File:104_config_menu_i.png|none|thumb|640x640px]]
 +
 +
You will be logger to a text file where you will need to find and edit some values:
 +
 +
PTT invert:
 +
 +
Search for the line begining with '''invertptt ='''  and change its value as follows:
 +
 +
'''0''' = Ground to Tramsmit.
 +
 +
'''1''' = Open to Transmit.
 +
[[File:105_invertptt.png|none|thumb|640x640px]]
 +
 +
COS/CTCSS invert:
 +
 +
Search for the line begining with '''carrierfrom ='''  and change its value as follows.
 +
 +
Search for the line begining with '''ctcssfrom ='''  and change its value as follows.
 +
 +
'''no''' = No carrier detection at all.
 +
 +
'''usb''' = Cor line active Hi.
 +
 +
'''usbinvert''' = Cor line active Low.
 +
[[File:106_invertcos.png|none|thumb|640x640px]]
 +
 +
After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. You will be back to the previous menu and choose '''<Back>'''.
 +
 +
[[File:107_asl_menu_9.png|none|thumb|640x640px]]
 +
 +
Choose option '''<G>''' to restar AllStarLink software and apply changes. Choose '''<Back>''', repeat your audio test if needed.
 +
[[File:107_asl_menu_9.png|none|thumb|640x640px]]
 +
 +
At this point your node should be up and running.
 +
 +
== Allmon2 Setup. ==
 +
 +
TBD
 +
 +
== Allmon2 web control. ==
 +
 +
TBD
 +
 +
== DTMF control. ==
 +
 +
TBD
Retrieved from "http://wiki.pttlink.org/wiki/Special:MobileDiff/1725"

Navigation menu