Difference between revisions of "Custom Repeater Splits"

From "PTTLink Wiki"
Jump to navigation Jump to search
(Created page)
 
m
Tag: visualeditor
 
Line 1: Line 1:
 
[[Category:How to]]
 
[[Category:How to]]
 +
 +
There are 2 ways of configuring custom repeater splits:
 +
 +
the new rpt.conf parameters (that go into the node stanza
 +
 +
in rpt.conf), are split2m and split70cm, which specify the
 +
 +
default offset for 2 meters and 70 centimeters in kilohertz.
 +
split2m = 600
 +
split70cm = 5000
 +
You may also specify the offset in a memory channel
 +
 +
by adding an additional parameter before the options,
 +
 +
for example:
 +
01 = 147.435,103.5,1035,h-t  ; This would be for W6NUT in Los Angeles with input of 146.40

Latest revision as of 04:21, 28 January 2019


There are 2 ways of configuring custom repeater splits:

the new rpt.conf parameters (that go into the node stanza

in rpt.conf), are split2m and split70cm, which specify the

default offset for 2 meters and 70 centimeters in kilohertz.

split2m = 600
split70cm = 5000

You may also specify the offset in a memory channel

by adding an additional parameter before the options,

for example:

01 = 147.435,103.5,1035,h-t  ; This would be for W6NUT in Los Angeles with input of 146.40