Changes

Jump to navigation Jump to search

Dnsmgr.conf (view source)

Revision as of 16:29, 1 January 2021

8 bytes removed ,  3 years ago
m
no edit summary
Line 1: Line 1:    −
dnsmgr.conf is used to enable dnsmgr in asterisk.  This is extremely important as nodes register using IAX2 to register.allstarlink.org, and the IP may change of this server from time to time.  Prior to 2018 there was only one registration server and it was a single point of failure.  If dnsmgr is not enabled, asterisk will only do a lookup once for the server when it is started.  The server IP may change and asterisk will use the old IP address (and fail registering) until it's restarted.   
+
dnsmgr.conf is used to enable dnsmgr in asterisk.  This is extremely important as nodes register using IAX2 to register.pttlink.org, and the IP may change of this server from time to time.  Prior to 2018 there was only one registration server and it was a single point of failure.  If dnsmgr is not enabled, asterisk will only do a lookup once for the server when it is started.  The server IP may change and asterisk will use the old IP address (and fail registering) until it's restarted.   
   −
With dnsmgr enabled, asterisk will refresh the IP address of register.allstarlink.org once every five minutes.   
+
With dnsmgr enabled, asterisk will refresh the IP address of register.pttlink.org once every five minutes.   
    
= dnsmgr.conf =  
 
= dnsmgr.conf =  
Line 16: Line 16:  
= Verify =  
 
= Verify =  
   −
     AllStar*CLI>iax2 show registry
+
     PTTLink*CLI>iax2 show registry
 
     Host                  dnsmgr  Username    Perceived            Refresh  State
 
     Host                  dnsmgr  Username    Perceived            Refresh  State
 
     44.72.21.13:4569      Y      44233      44.98.249.6:4569          60  Registered
 
     44.72.21.13:4569      Y      44233      44.98.249.6:4569          60  Registered
Retrieved from "http://wiki.pttlink.org/wiki/Special:MobileDiff/2287"

Navigation menu