You can use MikroTik devices as a way to connect to AMPRNet/44Net. Once connected, you can then setup your AllStarLink/PTTLink node with a 44Net IP address.
You can use MikroTik devices as a way to connect to AMPRNet/44Net. Once connected, you can then setup your AllStarLink/PTTLink node with a 44Net IP address.
+
+
== IPIP Tunnel ==
+
Explanation: https://www.ampr.org/ipip/
+
+
*Register for a an account on the AMPRNet portal https://www.ampr.org/portal/
+
*Once registered, request an address allocation using the AMPRNet portal
+
*Setup your MikroTik device to use the IPIP tunnel:
+
+
Use version 3.2 of YO2LOJ's Mikrotik RIPv2 Gateway Setup Script (as of Jul 2021)
+
+
Make sure you read the instruction in the README at http://www.yo2loj.ro/hamprojects/ampr-gw-README.txt
+
+
For RouterOS 6.41 and newer: http://www.yo2loj.ro/hamprojects/ampr-gw-3.2.rsc
+
+
For RouterOS pre-6.41: http://www.yo2loj.ro/hamprojects/ampr-gw-3.1.rsc
+
+
You can also download the above as a ZIP archive: http://www.yo2loj.ro/hamprojects/ampr-gw-3.2.zip