You will want to have newer (ie R020.014.048) firmware in the Station Control Module (SCM). Head on over to [https://wiki.w9cr.net/index.php/Quantar Bryan's site] to download the firmware files. You will also want to get the RSS manual and Service Manual when you are there.
+
You will want to have newer (ie R020.014.048) firmware in the Station Control Module (SCM). Head on over to [https://wiki.w9cr.net/index.php/Quantar Bryan's site]<ref name="W0CRWiki"/> to download the firmware files. You will also want to get the RSS manual and Service Manual when you are there.
Upgrade the firmware in your SCM and Wireline module, using the instructions in your RSS manual. You should end up with something like this when you go look at the versions screen in the RSS:
Upgrade the firmware in your SCM and Wireline module, using the instructions in your RSS manual. You should end up with something like this when you go look at the versions screen in the RSS:
−
<pre>
+
<syntaxhighlight lang="text">Station Control Firmware R020.14.048
−
Station Control Firmware R020.14.048
Station Wireline Firmware R020.14.003
Station Wireline Firmware R020.14.003
Station Exciter Firmware R020.09.018
Station Exciter Firmware R020.09.018
Station Boot2 Firmware R020.14.015
Station Boot2 Firmware R020.14.015
Station Boot1 Firmware R020.09.011
Station Boot1 Firmware R020.09.011
−
Codeplug Version 14
+
Codeplug Version 14</syntaxhighlight>
−
</pre>
Note, you will want to update your codeplug too, that is under the Tools --> Codeplug Upgrade menu.
Note, you will want to update your codeplug too, that is under the Tools --> Codeplug Upgrade menu.