36
edits
Changes
Jump to navigation
Jump to search
Line 634:
Line 634: + + + + + + + + + + + + + + +
no edit summary
If you want to use a mix client (non-voted), make sure that receiver's configuration line in voter.conf '''does not''' have the '''master''' option set.
If you want to use a mix client (non-voted), make sure that receiver's configuration line in voter.conf '''does not''' have the '''master''' option set.
==Mix Clients with Voted Client Issues==
Situation...
"I have a private node with 6 voted receivers using RTCMs. I'd like to add a 7th RTCM to this node that is always mixed in rather than voted. I'm able to make this RTCM work as a 7th voted receiver with no problem. Everything I've read seems to indicate that if I change GPS PPS polarity to "none" this will achieve my desired results, however I am unable to get audio out of my transmit RTCM from this 7th site. It does change color to cyan in Allmon indicating it is non voted input but I do not get any indication or audio when that units COR goes active."
"Setting voter debug level 3 in Asterisk and I'm seeing the following message repeatedly scrolling by in a blur when the mix client detects COR (COR is active). Sequence numbers are continually incrementing by 1. I'm running software version 1.47 on all my clients:"
<pre>
mix client (Mulaw) my_client index:0 their seq:629 our seq:629
mix client my_client outa bounds, resetting!!
</pre>
If you have a similar situation to the above... check your buflen in voter.conf. Make sure it is at >=160 and see if that fixes it.