896
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + − − − − − − − − − − −
no edit summary
The Micro-Node RTCM and VOTER interfaces are typically used with AllStar in voting/simulcast applications. They MAY be used for ANY repeater interface application, through the chan/voter channel driver.
The Micro-Node RTCM and VOTER interfaces are typically used with AllStar in voting/simulcast applications. They MAY be used for ANY repeater interface application, through the chan_voter channel driver. The VOTER is the original through-hole board designed by Jim Dixon for this application. It is open-source, and the relevant Gerber files and BoM to build it are available. The [http://www.micro-node.com/thin-m1.shtml Micro-Node Radio Thin Client Module (RTCM)] is the commercial version of the VOTER. It uses surface mount parts (SMT), but is functionally equivalent to the original VOTER. In general, the two terms (RTCM/VOTER) are used interchangeably, as they operate the same, and use the same firmware (mostly, see below).
The VOTER is the original through-hole board designed by Jim Dixon for this application. It is open-source, and the relevant Gerber files and BoM to build it are available.
The [http://www.micro-node.com/thin-m1.shtml Micro-Node Radio Thin Client Module (RTCM)] is the commercial version of the VOTER. It uses surface mount parts (SMT), but is functionally equivalent to the original VOTER.
In general, the two terms (RTCM/VOTER) are used interchangeably, as they operate the same, and use the same firmware (mostly, see below).
This page will highlight some of the operational concerns, quirks, bugs, and other items of interest that relate to these interfaces. Much of the information has been gleaned off the AllStar mail list, comes from personal experience, or comes from notes in the firmware source code.
This page will highlight some of the operational concerns, quirks, bugs, and other items of interest that relate to these interfaces. Much of the information has been gleaned off the AllStar mail list, comes from personal experience, or comes from notes in the firmware source code.
=Firmware=
=Firmware=