896
edits
Changes
Jump to navigation
Jump to search
Line 7:
Line 7: + + + +
no edit summary
=Testing=
=Testing=
RTCM's come preconfigured to login to [http://voter-demo-allstarlink.org voter-demo-allstarlink.org] for out of the box testing.
RTCM's come preconfigured to login to [http://voter-demo-allstarlink.org voter-demo-allstarlink.org] for out of the box testing.
=Factory Reset=
A factory reset can be performed by setting SW down and then applying power to the RTCM. Wait for the green LED to stop blinking, power off and set SW 1 back up.
=Firmware=
=Firmware=
The firmware in the RTCM and VOTER is the same, except it is compiled for the specific dsPIC that is installed in each. As such, the firmware is specific to the VOTER or the RTCM, and is NOT interchangeable (it won't boot in the wrong device). Firmware for the RTCM is denoted by "smt" in the filename.
The firmware in the RTCM and VOTER is the same, except it is compiled for the specific dsPIC that is installed in each. As such, the firmware is specific to the VOTER or the RTCM, and is NOT interchangeable (it won't boot in the wrong device). Firmware for the RTCM is denoted by "smt" in the filename.