167
edits
Changes
Jump to navigation
Jump to search
mLine 1:
Line 1: − '''Download links need updated...''' Line 6:
Line 5: − + − +
edited hyperlinks
[[Category:How to]]
[[Category:How to]]
The RTCM tries to update it's firmware every time it boots as part of the bootloader process. The bootloader has it's own IP address which is set by menu 14 of the IP parameters menu. The default bootloader IP address is 192.168.1.11. If that address fits in your network you can leave it there for all the RTCMs on your LAN as it is active only during the bootloader process.
The RTCM tries to update it's firmware every time it boots as part of the bootloader process. The bootloader has it's own IP address which is set by menu 14 of the IP parameters menu. The default bootloader IP address is 192.168.1.11. If that address fits in your network you can leave it there for all the RTCMs on your LAN as it is active only during the bootloader process.
If you are updating an RTCM which is behind a firewall you will need to port forward 16388 UDP to the bootloader IP address. If you leave all your bootloaders on the same IP address then you won't have to change the forwarding to update different RTCMs.
If you are updating an RTCM which is behind a firewall you will need to port forward 16388 UDP to the bootloader IP address. If you leave all your bootloaders on the same IP address then you won't have to change the forwarding to update different RTCMs.
The RTCM firmware is updated with a Windows program EBLEX C3 Programmer. Download from '''here'''. Put both the exe and the ini file in a folder.
The RTCM firmware is updated with a Windows program EBLEX C3 Programmer. Download from '''[https://github.com/AllStarLink/voter here]'''. Put both the exe and the ini file in a folder.
Download the firmware '''here'''. You probably want Voter-SMT.cry unless you built a thru-hole board or you need the dspbew version. Save the cry file in the folder with the exe and ini files.
Download the firmware '''[https://github.com/AllStarLink/voter here]'''. You probably want Voter-SMT.cry unless you built a thru-hole board or you need the dspbew version. Save the cry file in the folder with the exe and ini files.
Run the EBLEX Programmer:
Run the EBLEX Programmer: