Changes

Jump to navigation Jump to search

USBRadio Channel Driver (view source)

Revision as of 16:37, 1 January 2021

9 bytes removed ,  3 years ago
m
no edit summary
Line 110: Line 110:  
When configuring your usbradio node you '''''MUST''''' ensure that the name of the radio is the same in both rpt.conf and usbradio.conf.   
 
When configuring your usbradio node you '''''MUST''''' ensure that the name of the radio is the same in both rpt.conf and usbradio.conf.   
   −
Node names are in format of ''usb_<nodenumber>''.  Where <nodenumber> = the AllStar Link node of your system.  ''Note that usb and the node number are separated by an underscore (_) character.''
+
Node names are in format of ''usb_<nodenumber>''.  Where <nodenumber> = the PTTLink node of your system.  ''Note that usb and the node number are separated by an underscore (_) character.''
    
Example:<p>
 
Example:<p>
Line 123: Line 123:  
=Miscellaneous=
 
=Miscellaneous=
 
==Parallel Port Pin Numbers==
 
==Parallel Port Pin Numbers==
−
More information regarding numbering of parallel port hardware pins to their software equivalents can be found at [https://wiki.allstarlink.org/wiki/SimpleUSB_Channel_Driver#Parallel_Port_Pin_Numbers Parallel Port Pin Numbers]
+
More information regarding numbering of parallel port hardware pins to their software equivalents can be found at [https://wiki.pttlink.org/wiki/SimpleUSB_Channel_Driver#Parallel_Port_Pin_Numbers Parallel Port Pin Numbers]
    
[[Category:Node Configuration]]
 
[[Category:Node Configuration]]
Retrieved from "http://wiki.pttlink.org/wiki/Special:MobileDiff/2295"

Navigation menu