Line 55: |
Line 55: |
| | | |
| == TINC == | | == TINC == |
− | Information on how to setup TINC. | + | Information on how to setup tinc. |
| + | |
| + | You can download tinc for *nix and Windows systems from https://www.tinc-vpn.org/ |
| + | |
| + | === Simplified Windows setup === |
| + | Examples on how to setup Windows as either a server or client. |
| + | |
| + | ==== Server side config ==== |
| + | # Download tinc |
| + | # Install tinc# Open command prompt and type the following: |
| + | cd "C:\Program Files\tinc" |
| + | tinc -n vpn init master |
| + | tinc -n vpn add subnet 10.0.1.1 |
| + | tinc -n vpn add address=public.domain-or-ip |
| + | cd tap-win64 |
| + | addtap.bat |
| + | netsh interface ipv4 show interfaces (Note disconnected interface. May be called Ethernet 2) |
| + | netsh interface set interface name = "Ethernet 2" newname = "tinc" |
| + | netsh interface ip set address "tinc" static 10.0.1.1 255.255.255.0 |
| + | netsh interface ipv4 show config (Should create a tinc interface with IP and subnet) |
| + | cd .. |
| + | |
| + | To start tinc: |
| + | tincd -n vpn |
| + | |
| + | To invite clients: |
| + | tinc -n vpn invite client1 |
| + | |
| + | |
| + | ==== Client side config ==== |
| + | # Download tinc |
| + | # Install tinc |
| + | # Open command prompt and type the following: |
| + | cd "C:\Program Files\tinc" |
| + | tinc join <invite-url> |
| + | tinc -n vpn add subnet 10.0.1.2 |
| + | cd tap-win64 |
| + | addtap.bat |
| + | netsh interface ipv4 show interfaces (Note disconnected interface. May be called Ethernet 2) |
| + | netsh interface set interface name = "Ethernet 2" newname = "tinc" |
| + | netsh interface ip set address "tinc" static 10.0.1.2 255.255.255.0 |
| + | cd .. |
| + | |
| + | To test connection: |
| + | tincd -n vpn -D -d3 |
| + | |
| + | To run tinc as sercice: |
| + | tincd -n vpn |
| | | |
| == Wireguard == | | == Wireguard == |