Difference between revisions of "Voter.conf"
Jump to navigation
Jump to search
Tag: visualeditor-switched |
m |
||
| Line 1: | Line 1: | ||
=voter.conf = | =voter.conf = | ||
| − | This file sets up the app_rpt interface to an RTCM. The RTCM may be used in any of 3 modes; non-voting client mode, voting mode or voting and simulcast mode. More information is available on the | + | This file sets up the app_rpt interface to an RTCM. The RTCM may be used in any of 3 modes; non-voting client mode, voting mode or voting and simulcast mode. More information is available on the PTTLink Projects page. The RTCM user manual available from the Micro-Node site has additional information. |
<pre> | <pre> | ||
Latest revision as of 16:38, 1 January 2021
voter.conf
This file sets up the app_rpt interface to an RTCM. The RTCM may be used in any of 3 modes; non-voting client mode, voting mode or voting and simulcast mode. More information is available on the PTTLink Projects page. The RTCM user manual available from the Micro-Node site has additional information.
[general] port = 667 ; buflen = 120 min value that works at all buflen = 180 password = something [1234] NORTH = radio1,transmit SOUTH = radio2,master,transmit WEST = radio3,nodeemp ; bypass filter in RTCM EAST = radio4,transmit,noplfilter ; bypass filter in RTCM ; streams = 67.215.233.178:1667 ; plfilter = y ; DSP high pass filter txctcss = 107.2 txctcsslevel = 20 ; Transmit CTCSS level. Set to zero for off txtoctype = notone ; chicken burst thresholds = 255,110=5 linger=10