167
edits
Changes
Jump to navigation
Jump to search
mLine 1:
Line 1: + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
no edit summary
[[Category:How to]]
[[Category:How to]]
Sleep mode allows the local repeater receiver to be disabled after a set period of inactivity. The repeater receiver will be re-enabled if the following events occur:
1. An "awaken from sleep" COP command is decoded on any command source
2. There is traffic coming in from a remote node
3. There is telemetry coming in from a remote node.
Additionally, the sleep inactivity timer will be reset if there are any signals on the repeater input which are received during the time the system is awake.
=== COP Methods ===
51 Enable Sleep Mode
52 Disable Sleep Mode
53 Awaken from Sleep
54 Go back to sleep when the TX carrier drops
=== Node Stanza ===
sleeptime= - number of seconds of tx inactivity befor going to sleep. The default value for this setting is 900 seconds (15 minutes). Example:
sleeptime=300
=== Notes ===
Sleep mode is useful for temporarily resolving interference issues.
This feature is also known as "touch tone up".
This feature is available in app_rpt.c version 0.206 or later.