896
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + + + − +
no edit summary
==COP Commands==
==COP Commands==
COP (control operator) commands within rpt.conf take the format of. This would set touchtone 99 to enable the timeout time.
COP (control operator) commands
COP commands within rpt.conf take the general format of key/value pairs. This COP 7 example would set touchtone 99 to enable the timeout time.
<pre>99 = cop,7</pre>
<pre>99 = cop,7</pre>
Some COP commands can take multiple values. For example this COP 48 would send #3#607 on command.
Some COP commands can take multiple parameters. For example this COP 48 would send #3#607 on command.
<pre>900=cop,48,#,3,#,6,0,7</pre>
<pre>900=cop,48,#,3,#,6,0,7</pre>