ASL-Corp members, Bureaucrats, Check users, Structured Discussions bots, oversight, Suppressors, Administrators, Upload Wizard campaign editors
1,714
edits
Changes
Jump to navigation
Jump to search
Created initial page
= Compiling AllStarLink =
The following commands will allow you to compile AllStarLink's ASL 1.01 release.
These instructions assume you are already familiar with compiling and installing software on Linux.
Note: These instructions are currently a Work In Progress. You are going to have to resolve dependency issues yourself if you follow them.
You will also need to have cloned the main AllStarLink repo at https://github.com/AllStarLink/Asterisk
== DO NOT BLINDLY RUN THE COMMANDS HERE WITHOUT UNDERSTANDING WHAT THEY DO!! ==
This is for more advanced users. If you are a novice user at building software in a Linux environment or only prefer/can use plug and play/turnkey setups '''''THEN THIS IS NOT FOR YOU TO TRY!'''''
'''DO NOT TRY THIS ON A RASPBERRY PI UNLESS YOU KNOW HOW TO RESOLVE KERNEL SOURCE/DEPENDENCY ISSUES -- OTHERWISE YOU RUN THE RISK OF BLOWING UP YOUR SYSTEM!!'''
== Install requirements for building ==
apt-get install -y git build-essential linux-headers-$(uname -r) linux-source-4.9 libss7-dev wget apt-utils dahdi-source dahdi-linux aptitude tcsh gawk libusb-dev vim
== Get DAHDI source files ==
wget https://github.com/KG7QIN/AllStarLink/raw/master/dahdi/dahdi-linux-complete-2.10.2%2B2.10.2.tar.gz
== Asterisk Prereqs ==
mkdir /etc/vpb
apt-get build-dep asterisk -y
apt-get purge -y libopenr2-3 libopenr2-dev
dpkg --configure -a
apt-get install -f
== Extract and build DAHDI ==
tar -zxf dahdi-linux-complete-2.10.2+2.10.2.tar.gz
cd dahdi-linux-complete-2.10.2+2.10.2/linux/drivers/dahdi/voicebus/
echo "--- GpakApi.c.orig 2018-06-09 18:54:14.205144479 -0700\n" \
"+++ GpakApi.c 2018-06-09 18:54:28.196956036 -0700\n" \
"@@ -1560,7 +1560,7 @@\n" \
" if (DspStatus != 0)\n" \
" return (RmmFailure);\n" \
" \n" \
"- for (i = 0; i < MemoryLength_Word16; i++)\n" \
"+ for (i = 0; i < MemoryLength_Word16; i++) \n" \
" pDest[i] = (short int) MsgBuffer[2 + i]; \n" > patch1
patch -ful GpakApi.c patch1
cd dahdi-linux-complete-2.10.2+2.10.2/tools/xpp/
sed -i -e 's/inline /extern inline /g' echo_loader.c
cd dahdi-linux-complete-2.10.2+2.10.2/
sed -i -e 's/configure /configure CFLAGS=-Wno-error /g' Makefile
cd tools/xpp
sed -i -e 's/-I. -Ixtalk -Wall -Werror/-I. -Ixtalk -Wno-error/g' Makefile
cd ../..
make distclean
make
make install
make config
== Install GCC 4.9 to compile ASL 1.01 ==
echo "deb http://ftp.us.debian.org/debian/ jessie main contrib non-free" >> /etc/apt/sources.list
echo "deb-src http://ftp.us.debian.org/debian/ jessie main contrib non-free" >> /etc/apt/sources.list
apt-get update
apt-get install -y gcc-4.9 g++-4.9
== Build Asterisk for ASL ==
cd Asterisk/asterisk
make distclean
./configure CXX=g++-4.9 CC=gcc-4.9
make menuselect.makeopts || :
menuselect/menuselect --enable app_rpt --enable chan_beagle --enable chan_tlb --enable chan_usrp --enable chan_rtpdir --enable chan_usbradio --enable chan_simpleusb --enable chan_echolink --enable app_gps --enable chan_voter --enable radio-tune-menu --enable simpleusb-tune-menu menuselect.makeopts || :
make
make install
make samples
== Final ==
There is no guarantee this will work for you. Your mileage may vary.
The following commands will allow you to compile AllStarLink's ASL 1.01 release.
These instructions assume you are already familiar with compiling and installing software on Linux.
Note: These instructions are currently a Work In Progress. You are going to have to resolve dependency issues yourself if you follow them.
You will also need to have cloned the main AllStarLink repo at https://github.com/AllStarLink/Asterisk
== DO NOT BLINDLY RUN THE COMMANDS HERE WITHOUT UNDERSTANDING WHAT THEY DO!! ==
This is for more advanced users. If you are a novice user at building software in a Linux environment or only prefer/can use plug and play/turnkey setups '''''THEN THIS IS NOT FOR YOU TO TRY!'''''
'''DO NOT TRY THIS ON A RASPBERRY PI UNLESS YOU KNOW HOW TO RESOLVE KERNEL SOURCE/DEPENDENCY ISSUES -- OTHERWISE YOU RUN THE RISK OF BLOWING UP YOUR SYSTEM!!'''
== Install requirements for building ==
apt-get install -y git build-essential linux-headers-$(uname -r) linux-source-4.9 libss7-dev wget apt-utils dahdi-source dahdi-linux aptitude tcsh gawk libusb-dev vim
== Get DAHDI source files ==
wget https://github.com/KG7QIN/AllStarLink/raw/master/dahdi/dahdi-linux-complete-2.10.2%2B2.10.2.tar.gz
== Asterisk Prereqs ==
mkdir /etc/vpb
apt-get build-dep asterisk -y
apt-get purge -y libopenr2-3 libopenr2-dev
dpkg --configure -a
apt-get install -f
== Extract and build DAHDI ==
tar -zxf dahdi-linux-complete-2.10.2+2.10.2.tar.gz
cd dahdi-linux-complete-2.10.2+2.10.2/linux/drivers/dahdi/voicebus/
echo "--- GpakApi.c.orig 2018-06-09 18:54:14.205144479 -0700\n" \
"+++ GpakApi.c 2018-06-09 18:54:28.196956036 -0700\n" \
"@@ -1560,7 +1560,7 @@\n" \
" if (DspStatus != 0)\n" \
" return (RmmFailure);\n" \
" \n" \
"- for (i = 0; i < MemoryLength_Word16; i++)\n" \
"+ for (i = 0; i < MemoryLength_Word16; i++) \n" \
" pDest[i] = (short int) MsgBuffer[2 + i]; \n" > patch1
patch -ful GpakApi.c patch1
cd dahdi-linux-complete-2.10.2+2.10.2/tools/xpp/
sed -i -e 's/inline /extern inline /g' echo_loader.c
cd dahdi-linux-complete-2.10.2+2.10.2/
sed -i -e 's/configure /configure CFLAGS=-Wno-error /g' Makefile
cd tools/xpp
sed -i -e 's/-I. -Ixtalk -Wall -Werror/-I. -Ixtalk -Wno-error/g' Makefile
cd ../..
make distclean
make
make install
make config
== Install GCC 4.9 to compile ASL 1.01 ==
echo "deb http://ftp.us.debian.org/debian/ jessie main contrib non-free" >> /etc/apt/sources.list
echo "deb-src http://ftp.us.debian.org/debian/ jessie main contrib non-free" >> /etc/apt/sources.list
apt-get update
apt-get install -y gcc-4.9 g++-4.9
== Build Asterisk for ASL ==
cd Asterisk/asterisk
make distclean
./configure CXX=g++-4.9 CC=gcc-4.9
make menuselect.makeopts || :
menuselect/menuselect --enable app_rpt --enable chan_beagle --enable chan_tlb --enable chan_usrp --enable chan_rtpdir --enable chan_usbradio --enable chan_simpleusb --enable chan_echolink --enable app_gps --enable chan_voter --enable radio-tune-menu --enable simpleusb-tune-menu menuselect.makeopts || :
make
make install
make samples
== Final ==
There is no guarantee this will work for you. Your mileage may vary.