272
edits
Changes
Jump to navigation
Jump to search
Created page with "=voter.conf = This file sets up the app_rpt interface to an RTCM. The RTCM may be used in any of 3 modes; non-voting client mode, voting mode or voting and simulcast mode. Mo..."
=voter.conf =
This file sets up the app_rpt interface to an RTCM. The RTCM may be used in any of 3 modes; non-voting client mode, voting mode or voting and simulcast mode. More information is available on the Allstar Projects page. The RTCM user manual available from the Micro-Node site has additional information.
<pre>
[general]
port = 667
; buflen = 120 min value that works at all
buflen = 180
password = something
[1234]
NORTH = radio1,transmit
SOUTH = radio2,master,transmit
WEST = radio3,nodeemp ; bypass filter in RTCM
EAST = radio4,transmit,noplfilter ; bypass filter in RTCM
; streams = 67.215.233.178:1667
; plfilter = y ; DSP high pass filter
txctcss = 107.2
txctcsslevel = 20 ; Transmit CTCSS level. Set to zero for off
txtoctype = notone ; chicken burst
thresholds = 255,110=5
linger=10
</pre>
This file sets up the app_rpt interface to an RTCM. The RTCM may be used in any of 3 modes; non-voting client mode, voting mode or voting and simulcast mode. More information is available on the Allstar Projects page. The RTCM user manual available from the Micro-Node site has additional information.
<pre>
[general]
port = 667
; buflen = 120 min value that works at all
buflen = 180
password = something
[1234]
NORTH = radio1,transmit
SOUTH = radio2,master,transmit
WEST = radio3,nodeemp ; bypass filter in RTCM
EAST = radio4,transmit,noplfilter ; bypass filter in RTCM
; streams = 67.215.233.178:1667
; plfilter = y ; DSP high pass filter
txctcss = 107.2
txctcsslevel = 20 ; Transmit CTCSS level. Set to zero for off
txtoctype = notone ; chicken burst
thresholds = 255,110=5
linger=10
</pre>