Line 27: |
Line 27: |
| <pre> | | <pre> |
| [el0] | | [el0] |
− | confmode=no | + | confmode=no ; Conference mode |
− | call=W6ABC-R ; Change this! | + | call=W6ABC-R ; Change this to your callsign! |
− | pwd=XXXXX ; Change this! | + | pwd=XXXXX ; Change this to your password! |
− | name=Asterisk-EL-channel-driver ; Change this to your real name! | + | name=echolinkusername ; Change this to your real name! |
− | qth=Asterisk-EL-channel-driver ; Change this to your actual QTH! | + | qth=echolink-location ; Change this to your actual QTH! |
− | email=foo@bar.com ; Change this! | + | email=foo@bar.com ; Change this to your echolink registered email! |
− | maxstns=20 | + | maxstns=20 ; The maximum 'at-once' connections allowed/supported (see ** below) |
| + | node=123456 ; Change this to the assigned 'ECHOLINK' node# |
| + | astnode=2345 ; Change this to your active Allstar node number! |
| + | context=radio-secure ; The allstar context (leave the default unless you have good reason to change) |
| + | server1=server1.echolink.org |
| + | server2=server2.echolink.org |
| + | server3=server3.echolink.org |
| rtcptimeout=10 | | rtcptimeout=10 |
− | node=123456 ; Change this!
| |
| recfile=/tmp/recorded.gsm | | recfile=/tmp/recorded.gsm |
− | astnode=2345 ; Change this to your active Allstar node number!
| + | freq=145.000 ; Freq in MHz |
− | context=radio-secure
| + | tone=100.0 ; CTCSS Tone (0 for none) |
− | server1=server1.echolink.org
| + | lat=34.74978 ; Latitude in decimal degrees |
− | server2=server2.echolink.org
| + | lon=-92.27666 ; Longitude in decimal degrees |
− | server3=server3.echolink.org
| + | power=0 ; 0=0W, 1=1W, 2=4W, 3=9W, 4=16W, 5=25W, 6=36W, 7=49W, 8=64W, 9=81W (Power in Watts) |
− | freq=145.000 ; Freq in MHz | + | height=0 ; 0=10' ,1=20',2=40',3=80' ,4=160' ,5=320' ,6=640' ,7=1280',8=2560',9=5120' (AMSL in Feet) |
− | tone=100.0 ; CTCSS Tone (0 for none) | + | gain=7 ; Gain in db (0-9) |
− | lat=34.74978 ; Latitude in decimal degrees | + | dir=0 ; 0=omni, 1=45deg, 2=90deg, 3=135deg, 4=180deg, 5=225deg, 6=270deg, 7=315deg, 8=360deg (Direction) |
− | lon=-92.27666 ; Longitude in decimal degrees | |
− | power=0 ; 0=0W, 1=1W, 2=4W, 3=9W, 4=16W, 5=25W, 6=36W, 7=49W, 8=64W, 9=81W (Power in Watts) | |
− | height=0 ; 0=10' ,1=20',2=40',3=80' ,4=160' ,5=320' ,6=640' ,7=1280',8=2560',9=5120' (AMSL in Feet) | |
− | gain=7 ; Gain in db (0-9) | |
− | dir=0 ; 0=omni, 1=45deg, 2=90deg, 3=135deg, 4=180deg, 5=225deg, 6=270deg, 7=315deg, 8=360deg (Direction) | |
| </pre> | | </pre> |
| + | |
| + | ** How many stations will your node support ? The 2 most particular factors will be how much CPU/Memory power you have |
| + | AND how much bandwidth you have available. So you should not expect a bunch from cpu's under 1ghz or from memory below 1gb. |
| | | |
| Once you have made the changes, restart Asterisk, and within a few minutes time, the node should show up on the echolink.org website under [http://echolink.org Current Logins]. | | Once you have made the changes, restart Asterisk, and within a few minutes time, the node should show up on the echolink.org website under [http://echolink.org Current Logins]. |