Search results
Jump to navigation
Jump to search
- logger -i "NodeUpdate installed a new nodes list $whenandwhere" else #echo "NodeUpdate failed to parse node list; node list not updated" logger -i "NodeUpdate17 KB (2,069 words) - 17:52, 18 April 2022
- from Jesse Lloyd: I also had crazy problems with poor signal on my GPS when I set it up sitting in a window, and once installed at site I had the GPS antenna57 KB (9,850 words) - 01:41, 15 March 2021
- /configure CFLAGS=-Wno-error /g' Makefile # cd tools/xpp # sed -i -e 's/-I. -Ixtalk -Wall -Werror/-I. -Ixtalk -Wno-error/g' Makefile # cd ../../ # make distclean9 KB (1,562 words) - 20:44, 10 July 2021
- other full duplex nodes. When setting chan_usbradio to use a parallel port for I/O you must set a definition for the port address in rpt.conf: iobase=0x3785 KB (742 words) - 16:37, 1 January 2021
- duplex=1 ; Full Duplex When setting chan_simpleusb to use a parallel port for I/O you must set a definition for the port address in rpt.conf: iobase=0x3786 KB (867 words) - 17:53, 27 January 2022
- Raspberry Pi (ARM version). AllStarLink PTTLink is available as a installer for i386/AMD (PC) and as a SD card image for Raspberry Pi and other ARM boards.If14 KB (1,863 words) - 06:02, 28 January 2022
- node configuration files: sudo sed -i 's/allstarlink.org/pttlink.org/g' /usr/local/bin/rc.updatenodelist sudo sed -i 's/allstarlink.org/pttlink.org/g'4 KB (563 words) - 17:50, 18 April 2022
- types of GPIO as they currently exist in the software. I/O's from a URI/sound fob or equivelant AND I/O's from a hardware driven Parallel Port (usb converted5 KB (889 words) - 18:01, 27 January 2022
- settings is what I use: $ export DEBEMAIL="gurkan@phys.ethz.ch" $ export DEBFULLNAME="Gürkan Myczko" $ export EDITOR=mcedit For this course I have chosen mguesser7 KB (972 words) - 06:14, 6 September 2021
- logger -i "NodeUpdate installed a new nodes list $whenandwhere" else #echo "NodeUpdate failed to parse node list; node list not updated" logger -i "NodeUpdate19 KB (2,393 words) - 17:52, 18 April 2022
- scheduled back-up service at $1 a month. I'm not here to endorse them but it's there and I sometimes use it on instances I have. Originally by Mike (KB8JNM)5 KB (845 words) - 06:08, 6 September 2021
- -A INPUT -i $INET_IF -p 50 -j ACCEPT --src "$IPSECsrc" #iptables -A INPUT -i $INET_IF -p 51 -j ACCEPT --src "$IPSECsrc" #iptables -A INPUT -i $INET_IF -p70 KB (10,139 words) - 01:16, 23 February 2024
- -A INPUT -i $INET_IF -p 50 -j ACCEPT --src "$IPSECsrc" iptables -A INPUT -i $INET_IF -p 51 -j ACCEPT --src "$IPSECsrc" iptables -A INPUT -i $INET_IF -p14 KB (2,228 words) - 05:48, 24 January 2022
- extremely programmable and you will need a wireline card for I/O connections. By default the I/O will not work unless the "wildcard" table is programed. This10 KB (1,238 words) - 17:13, 27 May 2022
- Development - Information regarding development of the AllStarLink/PTTLink software (i.e., contributing, etc). Public APIs - Public "APIs" for retrieving information12 KB (1,079 words) - 14:27, 8 January 2024
- daily logs as follows: 20180330111954,Got MDC-1200 data I1701 from local system (41618) The format is I, E, S, C based on the type of call received. Note this4 KB (664 words) - 05:41, 28 January 2022