View source for Transmitting Tone Sequences

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in one of the groups: Users, ASL-Corp members.

You can view and copy the source of this page.

The following information is about transmitting tone sequences using COP functions in rpt.conf.

=== COP function ===
Cop function 48 is associated with transmitting arbitrary tone sequences. These tone sequences can be any combination of single tones, dual tones, and silence periods,

These tone sequences are only heard on the repeater transmitter and not sent over the network.

This function is available in app_rpt.c version 0.183 or later.

=== Tone Sequences ===
Tone sequences are specified as <code>!Tone_A+Tone_B/Duration_in_MS</code>. ToneB is optional and not specified, the + operator must be omitted.

The exclamation point operator is required when specifying arbitrary tones.

DTMF tones can be entered in shorthand fashion as as single digits separated by commas.

=== Examples ===
 881=cop,48,1,2,3,4,#                                           ; Send DTMF 1,2,3,4, and #
 882=cop,48,!399.8/1000,!339.6/2000                             ; Send two tone paging sequence: Motorola codes 144,141
 883=cop,48,!1100+1700/100,!0/60,!700+900/60,!0/60,!700+1100/60,!0/60,!700+900/60,!0/60,!1500+1700/60 ; Send MF tone sequence KP121ST
[[Category:How to]]

Return to Transmitting Tone Sequences.

Retrieved from "http://wiki.pttlink.org/wiki/Transmitting_Tone_Sequences"

View source for Transmitting Tone Sequences

Navigation menu

Search