Line 6: |
Line 6: |
| | | |
| | | |
− | repeater@repeater:~$ | + | repeater@repeater:~$ |
| | | |
| | | |
| Once you are there you have to type the following commands: | | Once you are there you have to type the following commands: |
| | | |
− | | + | repeater@repeater:~$ sudo apt update |
− | repeater@repeater:~$ sudo apt install git | + | repeater@repeater:~$ sudo apt install apache2 -y |
− | | + | repeater@repeater:~$ sudo apt install php libapache2-mod-php -y |
− | repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2 | + | repeater@repeater:~$ sudo apt install git |
− | | + | repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2 |
− | repeater@repeater:~$ cd /var/www/html/allmon2 | + | repeater@repeater:~$ cd /var/www/html/allmon2 |
− | | + | repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php |
− | repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php | + | repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php |
− | | |
− | repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php | |
| | | |
| | | |
Line 29: |
Line 27: |
| | | |
| | | |
− | repeater@repeater:~$ sudo nano allmon.ini.php | + | repeater@repeater:~$ cd /var/www/html/allmon2 |
| + | repeater@repeater:~$ sudo nano allmon.ini.php |
| | | |
− | # Change: the '500' number [500] to your node number. | + | # Change: the '500' number [500] to your node number. |
− | # Change: host=127.0.0.1:5038 | + | # Change: host=127.0.0.1:5038 |
− | # Change: passwd=yourpassword | + | # Change: passwd=yourpassword |
− | # (note: 'llcgi' is the default password acording to the initial node setup) | + | # (note: 'llcgi' is the default password according to the initial node setup) |
− | # Change: menu=yes | + | # Change: menu=yes |
| | | |
| | | |
Line 41: |
Line 40: |
| | | |
| | | |
− | repeater@repeater:~$ htpasswd -cB .htpasswd admin | + | repeater@repeater:~$ sudo htpasswd -cB /var/www/html/allmon2/.htpasswd admin |
| + | |
| + | Next you have to type twice your password (note: 'llcgi' is the default password according to the initial node setup). |
| + | |
| + | yourpassword |
| | | |
− | repeater@repeater:~$ chmod 777 astdb.php
| + | yourpassword |
| | | |
| + | repeater@repeater:~$ sudo chmod 777 astdb.php |
| | | |
| == Allmon2 Test and Use. == | | == Allmon2 Test and Use. == |
Line 53: |
Line 57: |
| Note: 192.168.x.x is your nodes IP. | | Note: 192.168.x.x is your nodes IP. |
| | | |
− | http:192.168.x.x/allmon2 | + | http:192.168.x.x/allmon2 |
| | | |
| There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'. | | There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'. |