The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.
Once you are there you have to type the following commands:
repeater@repeater:~$ sudo apt install git repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2 repeater@repeater:~$ cd /var/www/html/allmon2 repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php
Now you have to edit the allmon.ini.php file:
repeater@repeater:~$ sudo nano allmon.ini.php
- Change: the '500' number  to your node number.
- Change: host=127.0.0.1:5038
- Change: passwd=yourpassword
- (note: 'llcgi' is the default password acording to the initial node setup)
- Change: menu=yes
After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.
repeater@repeater:~$ htpasswd -cB .htpasswd admin repeater@repeater:~$ chmod 777 astdb.php
Test and Use
Using your web browser go to:
Note: 192.168.x.x is your nodes IP.
There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.
If you are using Lighttpd, you must modify your configuration to work with Allmon2.
Add the following line:
server.stream-response-body = 2
to /etc/lighttpd/lighttpd.conf and restart lighttpd.