Changes

Jump to navigation Jump to search

Whats Required (view source)

Revision as of 16:22, 1 January 2021

1,265 bytes added ,  4 years ago
m
no edit summary
Line 1: Line 1:  
[[Category:How to]]
 
[[Category:How to]]
 +
In order to deploy a remote base node, the following items will be required:
 +
# An assigned dedicated node number (e.g. pttlink.org)
 +
# A radio interface
 +
# A radio interface cable
 +
# A supported radio
 +
# A new or existing PC host computer
 +
 +
=== Requesting an PTTLink Node Number for a Remote Base ===
 +
Remote base nodes must be specifically requested from <nowiki>http://pttlink.org</nowiki>. When requesting a remote base node, check the box Rem. Base, and if the remote base is frequency agile, check the box Freq. Agile.
 +
 +
=== Radio Interface ===
 +
A free port on a radio interface such as the Quad Radio PCI card, or the URI adapter must be made available for use by the remote base
 +
 +
=== Radio Interface Cable ===
 +
A radio Interface cable must be constructed to interface the Radio to the Radio Interface. Links to schematics for a few of these cables are at the end of this book.
 +
 +
=== Supported Radios ===
 +
This is a list of remote base radios which are currently supported in app_rpt:
 +
# Dumb (Any radio, with no remote tuning capability)
 +
# Kenwood TMG-707A
 +
# Kenwoood TM-271
 +
# Yaesu FT-897D
 +
# Icom IC-706
 +
 +
=== Host Computer ===
 +
Any PC running ACID or Limey Linux with a spare PCI Slot for the Quad Radio PCI card, or a spare USB port for the URI.
 +
[[Category:Obsolete]]
Retrieved from "http://wiki.pttlink.org/wiki/Special:MobileDiff/1323...2279"

Navigation menu