Difference between revisions of "Allmon2 Install"
(Page creation) |
m |
||
| (9 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | == | + | [[Category:How to]] |
| + | [[Category:Node Configuration]] | ||
| + | [[Category:Allmon2]] | ||
| + | The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup. | ||
| + | |||
| + | repeater@repeater:~$ | ||
| + | |||
| + | Once you are there you have to type the following commands: | ||
| + | |||
| + | <syntaxhighlight lang="bash"> | ||
| + | repeater@repeater:~$ sudo apt install git | ||
| + | repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2 | ||
| + | repeater@repeater:~$ cd /var/www/html/allmon2 | ||
| + | repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php | ||
| + | repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php | ||
| + | </syntaxhighlight> | ||
| + | |||
| + | == Configuration == | ||
| + | |||
| + | Now you have to edit the allmon.ini.php file: | ||
| + | |||
| + | <syntaxhighlight lang="bash">repeater@repeater:~$ sudo nano allmon.ini.php</syntaxhighlight> | ||
| + | |||
| + | # Change: the '500' number [500] to your node number. | ||
| + | # Change: host=127.0.0.1:5038 | ||
| + | # Change: passwd=yourpassword | ||
| + | # (note: 'llcgi' is the default password acording to the initial node setup) | ||
| + | # Change: menu=yes | ||
| + | |||
| + | After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. You will be back to the previous menu and choose '''<Back>'''. | ||
| + | |||
| + | <syntaxhighlight lang="bash"> | ||
| + | repeater@repeater:~$ htpasswd -cB .htpasswd admin | ||
| + | repeater@repeater:~$ chmod 777 astdb.php | ||
| + | </syntaxhighlight> | ||
| + | |||
| + | == Test and Use == | ||
| + | |||
| + | Using your web browser go to: | ||
| + | |||
| + | Note: 192.168.x.x is your nodes IP. | ||
| + | |||
| + | <syntaxhighlight lang="http">http://192.168.x.x/allmon2</syntaxhighlight> | ||
| + | |||
| + | There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'. | ||
| + | |||
| + | == Lighttpd Notes == | ||
| + | '''If you are using Lighttpd, you must modify your configuration to work with Allmon2.''' | ||
| + | |||
| + | Add the following line: | ||
| + | <syntaxhighlight lang="ini">server.stream-response-body = 2</syntaxhighlight> | ||
| + | to /etc/lighttpd/lighttpd.conf and restart lighttpd. | ||
Latest revision as of 19:00, 27 January 2022
The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.
repeater@repeater:~$
Once you are there you have to type the following commands:
repeater@repeater:~$ sudo apt install git
repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2
repeater@repeater:~$ cd /var/www/html/allmon2
repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php
repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php
Configuration
Now you have to edit the allmon.ini.php file:
repeater@repeater:~$ sudo nano allmon.ini.php
- Change: the '500' number [500] to your node number.
- Change: host=127.0.0.1:5038
- Change: passwd=yourpassword
- (note: 'llcgi' is the default password acording to the initial node setup)
- Change: menu=yes
After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.
repeater@repeater:~$ htpasswd -cB .htpasswd admin
repeater@repeater:~$ chmod 777 astdb.php
Test and Use
Using your web browser go to:
Note: 192.168.x.x is your nodes IP.
http://192.168.x.x/allmon2
There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.
Lighttpd Notes
If you are using Lighttpd, you must modify your configuration to work with Allmon2.
Add the following line:
server.stream-response-body = 2
to /etc/lighttpd/lighttpd.conf and restart lighttpd.