Difference between revisions of "Allmon2 Install"
(Page creation) |
(First review) |
||
| Line 1: | Line 1: | ||
| − | == Allmon2 Install and | + | Allmon2 Setup. |
| + | |||
| + | == Allmon2 Install. == | ||
| + | |||
| + | The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup. | ||
| + | |||
| + | |||
| + | repeater@repeater:~$ | ||
| + | |||
| + | |||
| + | Once you are there you have to type the following commands: | ||
| + | |||
| + | |||
| + | repeater@repeater:~$ sudo apt install git | ||
| + | |||
| + | repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2 | ||
| + | |||
| + | repeater@repeater:~$ cd /var/www/html/allmon2 | ||
| + | |||
| + | repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php | ||
| + | |||
| + | repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php | ||
| + | |||
| + | |||
| + | |||
| + | == Allmon2 Configuration. == | ||
| + | |||
| + | Now you have to edit the allmon.ini.php file: | ||
| + | |||
| + | |||
| + | repeater@repeater:~$ sudo nano allmon.ini.php | ||
| + | |||
| + | # Change: the '500' number [500] to your node number. | ||
| + | # Change: host=127.0.0.1:5038 | ||
| + | # Change: passwd=yourpassword | ||
| + | # (note: 'llcgi' is the default password acording to the initial node setup) | ||
| + | # Change: menu=yes | ||
| + | |||
| + | |||
| + | After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. You will be back to the previous menu and choose '''<Back>'''. | ||
| + | |||
| + | |||
| + | repeater@repeater:~$ htpasswd -cB .htpasswd admin | ||
| + | |||
| + | repeater@repeater:~$ chmod 777 astdb.php | ||
| + | |||
| + | |||
| + | == Allmon2 Test and Use. == | ||
| + | |||
| + | Using your web browser go to: | ||
| + | |||
| + | |||
| + | Note: 192.168.x.x is your nodes IP. | ||
| + | |||
| + | http:192.168.x.x/allmon2 | ||
| + | |||
| + | There you can login with the user 'admin' and your password 'yourpassword'. | ||
Revision as of 17:43, 15 April 2020
Allmon2 Setup.
Allmon2 Install.
The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.
repeater@repeater:~$
Once you are there you have to type the following commands:
repeater@repeater:~$ sudo apt install git
repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2
repeater@repeater:~$ cd /var/www/html/allmon2
repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php
repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php
Allmon2 Configuration.
Now you have to edit the allmon.ini.php file:
repeater@repeater:~$ sudo nano allmon.ini.php
- Change: the '500' number [500] to your node number.
- Change: host=127.0.0.1:5038
- Change: passwd=yourpassword
- (note: 'llcgi' is the default password acording to the initial node setup)
- Change: menu=yes
After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.
repeater@repeater:~$ htpasswd -cB .htpasswd admin
repeater@repeater:~$ chmod 777 astdb.php
Allmon2 Test and Use.
Using your web browser go to:
Note: 192.168.x.x is your nodes IP.
http:192.168.x.x/allmon2
There you can login with the user 'admin' and your password 'yourpassword'.