Allmon2 Install

Allmon2 Install.

Allmon2 Install.

The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.

repeater@repeater:~$

Once you are there you have to type the following commands:

repeater@repeater:~$ sudo apt update
repeater@repeater:~$ sudo apt install apache2 -y
repeater@repeater:~$ sudo apt install php libapache2-mod-php -y
repeater@repeater:~$ sudo apt install git
repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2
repeater@repeater:~$ cd /var/www/html/allmon2
repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php
repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php

Allmon2 Configuration.

Now you have to edit the allmon.ini.php file:

repeater@repeater:~$ cd /var/www/html/allmon2
repeater@repeater:~$ sudo nano allmon.ini.php

# Change: the '500' number [500] to your node number.
# Change: host=127.0.0.1:5038
# Change: passwd=yourpassword
# (note: 'llcgi' is the default password according to the initial node setup)
# Change: menu=yes

After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.

repeater@repeater:~$ sudo htpasswd -cB /var/www/html/allmon2/.htpasswd admin

Next you have to type twice your password (note: 'llcgi' is the default password according to the initial node setup).

yourpassword

yourpassword

repeater@repeater:~$ sudo chmod 777 astdb.php

Allmon2 Test and Use.

Using your web browser go to:

Note: 192.168.x.x is your nodes IP.

http:192.168.x.x/allmon2

There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.