Line 1: |
Line 1: |
− | == Allmon2 Install and Setup == | + | [[Category:How to]] |
| + | [[Category:Node Configuration]] |
| + | [[Category:Allmon2]] |
| + | The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup. |
| + | |
| + | repeater@repeater:~$ |
| + | |
| + | Once you are there you have to type the following commands: |
| + | |
| + | <syntaxhighlight lang="bash"> |
| + | repeater@repeater:~$ sudo apt install git |
| + | repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2 |
| + | repeater@repeater:~$ cd /var/www/html/allmon2 |
| + | repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php |
| + | repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php |
| + | </syntaxhighlight> |
| + | |
| + | == Configuration == |
| + | |
| + | Now you have to edit the allmon.ini.php file: |
| + | |
| + | <syntaxhighlight lang="bash">repeater@repeater:~$ sudo nano allmon.ini.php</syntaxhighlight> |
| + | |
| + | # Change: the '500' number [500] to your node number. |
| + | # Change: host=127.0.0.1:5038 |
| + | # Change: passwd=yourpassword |
| + | # (note: 'llcgi' is the default password acording to the initial node setup) |
| + | # Change: menu=yes |
| + | |
| + | After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. You will be back to the previous menu and choose '''<Back>'''. |
| + | |
| + | <syntaxhighlight lang="bash"> |
| + | repeater@repeater:~$ htpasswd -cB .htpasswd admin |
| + | repeater@repeater:~$ chmod 777 astdb.php |
| + | </syntaxhighlight> |
| + | |
| + | == Test and Use == |
| + | |
| + | Using your web browser go to: |
| + | |
| + | Note: 192.168.x.x is your nodes IP. |
| + | |
| + | <syntaxhighlight lang="http">http://192.168.x.x/allmon2</syntaxhighlight> |
| + | |
| + | There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'. |
| + | |
| + | == Lighttpd Notes == |
| + | '''If you are using Lighttpd, you must modify your configuration to work with Allmon2.''' |
| + | |
| + | Add the following line: |
| + | <syntaxhighlight lang="ini">server.stream-response-body = 2</syntaxhighlight> |
| + | to /etc/lighttpd/lighttpd.conf and restart lighttpd. |