Difference between revisions of "Allmon2 Install"

From "PTTLink Wiki"
Jump to navigation Jump to search
(Page creation)
 
(First review)
Line 1: Line 1:
==  Allmon2 Install and Setup ==
+
Allmon2 Setup.
 +
 
 +
==  Allmon2 Install.  ==
 +
 
 +
The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.
 +
 
 +
 
 +
repeater@repeater:~$
 +
 
 +
 
 +
Once you are there you have to type the following commands:
 +
 
 +
 
 +
repeater@repeater:~$ sudo apt install git
 +
 
 +
repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2
 +
 
 +
repeater@repeater:~$ cd /var/www/html/allmon2
 +
 
 +
repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php
 +
 
 +
repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php
 +
 
 +
 
 +
 
 +
==  Allmon2 Configuration.  ==
 +
 
 +
Now you have to edit the allmon.ini.php file:
 +
 
 +
 
 +
repeater@repeater:~$ sudo nano allmon.ini.php
 +
 
 +
# Change: the '500' number [500] to your node number.
 +
# Change: host=127.0.0.1:5038
 +
# Change: passwd=yourpassword
 +
# (note: 'llcgi' is the default password acording to the initial node setup)
 +
# Change: menu=yes
 +
 
 +
 
 +
After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. You will be back to the previous menu and choose '''<Back>'''.
 +
 
 +
 
 +
repeater@repeater:~$ htpasswd -cB .htpasswd admin
 +
 
 +
repeater@repeater:~$ chmod 777 astdb.php
 +
 
 +
 
 +
==  Allmon2 Test and Use. ==
 +
 
 +
Using your web browser go to:
 +
 
 +
 
 +
Note: 192.168.x.x is your nodes IP.
 +
 
 +
http:192.168.x.x/allmon2
 +
 
 +
There you can login with the user 'admin' and your password 'yourpassword'.

Revision as of 17:43, 15 April 2020

Allmon2 Setup.

Allmon2 Install.

The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.


repeater@repeater:~$


Once you are there you have to type the following commands:


repeater@repeater:~$ sudo apt install git

repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2

repeater@repeater:~$ cd /var/www/html/allmon2

repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php

repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php


Allmon2 Configuration.

Now you have to edit the allmon.ini.php file:


repeater@repeater:~$ sudo nano allmon.ini.php

  1. Change: the '500' number [500] to your node number.
  2. Change: host=127.0.0.1:5038
  3. Change: passwd=yourpassword
  4. (note: 'llcgi' is the default password acording to the initial node setup)
  5. Change: menu=yes


After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.


repeater@repeater:~$ htpasswd -cB .htpasswd admin

repeater@repeater:~$ chmod 777 astdb.php


Allmon2 Test and Use.

Using your web browser go to:


Note: 192.168.x.x is your nodes IP.

http:192.168.x.x/allmon2

There you can login with the user 'admin' and your password 'yourpassword'.