445
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
First review
== Allmon2 Install and Setup ==
Allmon2 Setup.
== Allmon2 Install. ==
The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.
repeater@repeater:~$
Once you are there you have to type the following commands:
repeater@repeater:~$ sudo apt install git
repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2
repeater@repeater:~$ cd /var/www/html/allmon2
repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php
repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php
== Allmon2 Configuration. ==
Now you have to edit the allmon.ini.php file:
repeater@repeater:~$ sudo nano allmon.ini.php
# Change: the '500' number [500] to your node number.
# Change: host=127.0.0.1:5038
# Change: passwd=yourpassword
# (note: 'llcgi' is the default password acording to the initial node setup)
# Change: menu=yes
After making your changes type '''<CTRL> + <X>''' and then type '''<Y>''' followed by '''<Enter>'''. You will be back to the previous menu and choose '''<Back>'''.
repeater@repeater:~$ htpasswd -cB .htpasswd admin
repeater@repeater:~$ chmod 777 astdb.php
== Allmon2 Test and Use. ==
Using your web browser go to:
Note: 192.168.x.x is your nodes IP.
http:192.168.x.x/allmon2
There you can login with the user 'admin' and your password 'yourpassword'.