Difference between revisions of "Allmon2 Install"
Jump to navigation
Jump to search
m |
m |
||
| Line 6: | Line 6: | ||
| − | repeater@repeater:~$ | + | repeater@repeater:~$ |
Once you are there you have to type the following commands: | Once you are there you have to type the following commands: | ||
| − | + | repeater@repeater:~$ sudo apt update | |
| − | repeater@repeater:~$ sudo apt install git | + | repeater@repeater:~$ sudo apt install apache2 -y |
| − | + | repeater@repeater:~$ sudo apt install php libapache2-mod-php -y | |
| − | repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2 | + | repeater@repeater:~$ sudo apt install git |
| − | + | repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2 | |
| − | repeater@repeater:~$ cd /var/www/html/allmon2 | + | repeater@repeater:~$ cd /var/www/html/allmon2 |
| − | + | repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php | |
| − | repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php | + | repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php |
| − | |||
| − | repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php | ||
| Line 29: | Line 27: | ||
| − | repeater@repeater:~$ sudo nano allmon.ini.php | + | repeater@repeater:~$ cd /var/www/html/allmon2 |
| + | repeater@repeater:~$ sudo nano allmon.ini.php | ||
| − | # Change: the '500' number [500] to your node number. | + | # Change: the '500' number [500] to your node number. |
| − | # Change: host=127.0.0.1:5038 | + | # Change: host=127.0.0.1:5038 |
| − | # Change: passwd=yourpassword | + | # Change: passwd=yourpassword |
| − | # (note: 'llcgi' is the default password | + | # (note: 'llcgi' is the default password according to the initial node setup) |
| − | # Change: menu=yes | + | # Change: menu=yes |
| Line 41: | Line 40: | ||
| − | repeater@repeater:~$ htpasswd -cB .htpasswd admin | + | repeater@repeater:~$ sudo htpasswd -cB /var/www/html/allmon2/.htpasswd admin |
| + | |||
| + | Next you have to type twice your password (note: 'llcgi' is the default password according to the initial node setup). | ||
| + | |||
| + | yourpassword | ||
| − | + | yourpassword | |
| + | repeater@repeater:~$ sudo chmod 777 astdb.php | ||
== Allmon2 Test and Use. == | == Allmon2 Test and Use. == | ||
| Line 53: | Line 57: | ||
Note: 192.168.x.x is your nodes IP. | Note: 192.168.x.x is your nodes IP. | ||
| − | http:192.168.x.x/allmon2 | + | http:192.168.x.x/allmon2 |
There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'. | There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'. | ||
Revision as of 16:48, 24 October 2020
Allmon2 Install.
Allmon2 Install.
The first thing to do is to log on your node as user 'repeater' command line, you can log in with a keyboard and monitor or using SSH as in the initial node setup.
repeater@repeater:~$
Once you are there you have to type the following commands:
repeater@repeater:~$ sudo apt update repeater@repeater:~$ sudo apt install apache2 -y repeater@repeater:~$ sudo apt install php libapache2-mod-php -y repeater@repeater:~$ sudo apt install git repeater@repeater:~$ sudo git clone https://github.com/tsawyer/allmon2.git /var/www/html/allmon2 repeater@repeater:~$ cd /var/www/html/allmon2 repeater@repeater:~$ sudo mv allmon.ini.txt allmon.ini.php repeater@repeater:~$ sudo mv controlpanel.ini.txt controlpanel.ini.php
Allmon2 Configuration.
Now you have to edit the allmon.ini.php file:
repeater@repeater:~$ cd /var/www/html/allmon2 repeater@repeater:~$ sudo nano allmon.ini.php
# Change: the '500' number [500] to your node number. # Change: host=127.0.0.1:5038 # Change: passwd=yourpassword # (note: 'llcgi' is the default password according to the initial node setup) # Change: menu=yes
After making your changes type <CTRL> + <X> and then type <Y> followed by <Enter>. You will be back to the previous menu and choose <Back>.
repeater@repeater:~$ sudo htpasswd -cB /var/www/html/allmon2/.htpasswd admin
Next you have to type twice your password (note: 'llcgi' is the default password according to the initial node setup).
yourpassword
yourpassword
repeater@repeater:~$ sudo chmod 777 astdb.php
Allmon2 Test and Use.
Using your web browser go to:
Note: 192.168.x.x is your nodes IP.
http:192.168.x.x/allmon2
There you can login with the user 'admin' and your password 'yourpassword' or remember default password is 'llcgi'.