Difference between revisions of "Category:Node Configuration"

From "PTTLink Wiki"
Jump to navigation Jump to search
m (Linked to Node Configuration)
Tag: visualeditor
m
Line 1: Line 1:
 
[[How to add WiFi Connection to Raspberry Pi 4B (RPi 4B)|These]] pages detail how to configure a node.  
 
[[How to add WiFi Connection to Raspberry Pi 4B (RPi 4B)|These]] pages detail how to configure a node.  
  
−
If you are new to AllStar you should fires read [[Structure of Config Files]]. Then look at [[rpt.conf]] as that is where the majority of settings you're likely to be interesting in learning.
+
If you are new to PTTLink you should fires read [[Structure of Config Files]]. Then look at [[rpt.conf]] as that is where the majority of settings you're likely to be interesting in learning.

Revision as of 16:26, 1 January 2021

These pages detail how to configure a node.

If you are new to PTTLink you should fires read Structure of Config Files. Then look at rpt.conf as that is where the majority of settings you're likely to be interesting in learning.

Subcategories

This category has only the following subcategory.

N

Retrieved from "http://wiki.pttlink.org/index.php?title=Category:Node_Configuration&oldid=2285"