Search results
Jump to navigation
Jump to search
- First Time Configuration section You can use MikroTik devices as a way to connect to AMPRNet/44Net. Once connected, you can then setup your AllStarLink/PTTLink6 KB (938 words) - 06:56, 24 January 2022
- close enough). If you do have an external PL reject filter in the receiver, you should be able to use rxhpf=1 no matter what tone you're using. Some receiver8 KB (1,312 words) - 17:09, 1 January 2021
- iobase=0x278 - iobase=0x3bc / LPT1, LPT2 and LPT3 respectively. If you might imagine you may use a Doug Hall RBI-1 interface, then begin populating Parallel5 KB (889 words) - 18:01, 27 January 2022
- Here you will find Frequently Asked Questions regarding AllStarLink/PTTLink. Please visit the new page at PTTLink FAQ246 bytes (18 words) - 03:25, 6 September 2021
- a VERY BAD idea to expose TELNET to the public Internet, you accept all responsibility if you choose not to heed this warning! Typically, the IP bandwidth34 KB (5,276 words) - 05:21, 28 January 2022
- power you have AND how much bandwidth you have available. So you should not expect a bunch from cpu's under 1ghz or from memory below 1gb. Once you have9 KB (1,258 words) - 05:16, 28 January 2022
- node numbers. If you are including more than one call sign then you will need to specify the node number and each related call sign. You will then receive4 KB (563 words) - 17:50, 18 April 2022
- enter your new call sign. Note: If the call sign you are requesting is already registered with PTTLink you won't be able to change it here. Please email helpdesk@pttlink4 KB (361 words) - 20:39, 10 July 2021
- message. Choose option <Back>. Choose option <AZ>. Review what you wrote down with what you have configured on your system and press <Enter>. Choose <Yes>3 KB (241 words) - 04:00, 6 September 2021
- right channel txmixb=tone Ensure you have enough audio output from the receiver. Check with a AC voltmeter or scope. You need to have at least 100mV peak7 KB (644 words) - 06:11, 6 September 2021
- issues: client_max_body_size 5000m; You will need to adjust the size to a value suitable for your environment. You will need to create an additional docker17 KB (2,231 words) - 06:52, 24 January 2022
- password of pttlink. When you login the first time you will be forced to change the password. The user repeater has sudo rights. You can then continue the14 KB (1,863 words) - 06:02, 28 January 2022
- from News and Updates. You can find PTTLink Bulletins here PTTLink's code is freely available on GitHub in the PTTLink Repository You can also find the source2 KB (199 words) - 02:45, 15 March 2021
- Then choose the server you want the node assigned to. You can change that later. 3) Type an optional message and press Submit You will then see a pending8 KB (1,199 words) - 06:18, 6 September 2021
- _1NXXNXXXXXX,2,Congestion The peer stanza you insert in iax.conf or sip.conf should preferably be provided by your ITSP. You'll want to use the stanza they identify6 KB (684 words) - 15:39, 28 January 2019
- the USB fobs. If you must use a USB hub, use only multi-TT types, but be forewarned that you may have to test several models until you find one which works3 KB (564 words) - 16:20, 1 January 2021
- check everything and you can boot the server. It will now boot and install ubuntu and should have a public IP in the 44net range You will want to ensure7 KB (957 words) - 02:29, 28 December 2020
- Below are links to all 24 modules to download in .PDF form. Additionally, you can also find the latest versions on the Internet Archive at the link listed4 KB (262 words) - 04:41, 24 January 2022
- background color of the node number will be green. If your node is registered you are ready to connect to other nodes after a short while. It takes 20 to 30850 bytes (143 words) - 15:51, 1 January 2021
- of (test mode - 1) frames. In other words, if you set it to 2, it will change every single time. If you set it to 11, it will change every 10 times. This16 KB (2,656 words) - 19:09, 31 March 2019